User's Manual

Terminal Technician Making Initial E.S.P. Unit Readings
02.09.02 Page 35 of 70
Using In Inventory Function with E.S.P. Unit
You use this procedure for the following reasons:
§ To record a dismounted tire as being in a terminal or warehouse prior to sending
the tire to retread, repair or disposal.
§ To record a dismounted tire as being in a terminal or warehouse inventory prior to
shipping the tire to another terminal or warehouse
§ To inventory tires in a terminal or warehouse
To use the In Inventory function, do the following:
1. Power up the E.S.P. Unit with its On/Off key. If you see a menu other than the Main
Menu on the E.S.P. Unit screen, press the CLR (Clear) key until the Main Menu
appears.
MAIN MENU
1: Action Menu
2: Send/Rec Data
3: Erase Data
4: Version
5: Read Sensor
Main Menu
2. Use the keypad Up and Down arrows to highlight the Action Menu option.
3. Press the Enter key to call up the Action Menu.
ACTION MENU
1: Add New Tires
2: Inspect & Mount
3: Dismount Tire
4: Repair Menu
5: Retread Menu
6: Dispose Tire
7: Ship/Receive
8: In Inventory
9: Match Vehicle
0: Change Fleet
Action Menu
4. Use the Up and Down arrows to highlight the In Inventory option.