User's Manual

Terminal Technician Making Initial E.S.P. Unit Readings
02.09.02 Page 53 of 70
Selecting the Code from a List
1. On the Enter Code screen, key in the first and/or second numbers of the code.
RETREAD DESIGN
Enter Code:
___
Enter Code Screen
2. Press Enter to call up a list of codes with those first digits.
3. Use the arrow keys to highlight the code that you want.
4. Note that when you highlight a listing, the full code and a full description is highlighted
at the bottom of the screen.
5. Press Enter to save the transaction.
Searching by Description
1. On the Retread Design Search screen, press the N key to search by description.
RETREAD DESIGN
Search by code?
(Y/N)
Y = by code
N = by description
Retread Design Search Screen
2. When the screen asks for a description, key in the first word or two of the code's
description.
3. Press the Enter key.
4. Check that the screen reloads and displays at least one code and description.
5. If not already highlighted, use the arrow keys to highlight the code description that you
want.. Note that the full code and description appear highlighted at the bottom of the
screen.
6. Press Enter to save the transaction.
See the procedure Entering Costs and Other Specifics for your next steps.