User's Manual

Terminal Technician Making Initial E.S.P. Unit Readings
02.09.02 Page 60 of 70
Searching by Scrap Reason Code
1. On the Code Search screen, press Y to search by Scrap Reason Code. The Enter
Code screen will appear.
SCRAP REASON
Enter Code:
___
Enter Code Screen
2. On the Enter Code screen, you can choose to:
+ Key in an exact code.
+ Key in the first and/or second numbers of the code then select from a listing.
Keying in an exact code
1. Key in the exact Scrap Reason code.
2. Press Enter.
Selecting a code from a list
1. Key in the first and/or second numbers of the code.
2. Press Enter.
3. All codes beginning with that number(s) will be listed. For example, if you key in 5,
you will see the listings Customer Spec. Repair (509), Failed Repair (537), Improper
Nail Hole Repair (543), Bad Spot Repair (544).
If you key in 1, you will see the screen shown below.
SCRAP REASON
0: Crown Penetration
1: Multiple tread cuts
2: Stone Drilling
3: Rib, Lug Cracking
4: Groove Cracking
5: Regrooving
Damage
6: Vehicle Damage
7: Excessive Wear
8: Brake Skid Damage
102 Multiple tread
cuts/tearing
Code Search Results Screen
4. Use the arrow keys to highlight the listing that you want.
5. Note that when you highlight a listing, its Condition Code and full description appear
highlighted at the bottom of the screen.
6. Press Enter to call up the Dispose Vendor Screen.