3M Digital Wall Display Operator's Guide 8100CB 8200IW 8200IC

Remote Control Unit

3M™ Digital WallDisplay

Forward Keypad

Power

Press to turn the 3M Digital WallDisplay on/off. When power is turned on, the 3M Digital WallDisplay will

automatically extend the projection arm and ignite the lamp.

Mute

Press to temporarily turn off the sound. Press again or press the Volume + or - buttons to restore sound.

Disk Pad

Press to:

• control the computer’s mouse when using the Mouse function.

• select menu items and adjust values in the onscreen menu system.

• control the Pointer position while using the Pointer function.

• control the path of the Reveal function.

While using the onscreen menu system or Pointer function, the computer Mouse function is temporarily dis-

abled. To regain computer mouse control, turn off the current function or the onscreen menu system.

Note: The USB or serial mouse cable must be connected between the 3M Digital WallDisplay and the

computer when using Mouse mode.

R Mouse

Acts as the right-mouse-button when the mouse function is active.

Press to display the onscreen menu system or to cancel display.

Blank

Press to make the screen go blank. Press again to return to normal display function.

Input

Press to change the source of input for 3M Digital WallDisplay. The Input button cycles between Computer,

DVI, Composite Video (RCA jacks), and S-Video.