3M Digital Wall Display Operator's Guide 8100CB 8200IW 8200IC

Remote Control Unit

3M™ Digital WallDisplay

Rear Keypad

Pointer

Press to turn the pointing function on/off. A green dot will appear on the screen. The dot can be controlled by

pressing the arrows on the Disk Pad.

Volume

Press the + button to increase or the - button to decrease the speaker loudness level. When the audio is muted,

the

Volume + or - buttons will also cancel the Mute function.

Timer

Press to turn the timing function on/off. The timer will display on the screen and begin to count down. To change

the Timer value, refer to the

On Scrn Timer sub-menu in the Tools menu.

Freeze

Amoving image can be stilled or ‘frozen’ when the Freeze button is pressed. To release the Freeze function,

press the

Freeze button again.

Reveal

Press to turn the screen-reveal function on/off. Press the Disk Pad in the desired reveal direction (e.g. press

down to reveal from the top down, etc.).

Trigger Button

On the underside of the remote control unit, beneath the IR sensor, press button for left-mouse-button functions.

POWER

MOUSE

INPUT

BLANK

MUTE

POINTER

FREEZE

REVEAL TIMER

VOLUME