Laptop User Manual

Installation

2.1 Introduction

This section contains unpacking and preparation for use instructions for

the TM5000 Series Notebook Computers. This includes:

• Removing the computer and all manuals, options and accessories from

the shipping container(s) (Paragraph 2.2)

• Installing Internal Notebook Options (Paragraph 2.3)

• Installing External Notebook Options (Paragraph 2.4)

• Installing Battery Packs (Paragraph 2.5)

• Installing Desktop Devices (Paragraph 2.6)

• Installing the AC Adapter (Paragraph 2.7)

• Checking Out the System (Paragraph 2.8)

• Configuring the System (Paragraph 2.9)

• Making Backups of System Software (Paragraph 2.10)

• Loading Application Software (Paragraph 2.11)

• Securing Notebook to Workstation (Paragraph 2.12)

2.2 Unpacking Instructions

The packaging diagram for the notebook computer is shown in Figures 2-1

and 2-2. Unpack the computer using the following instructions:

1. Carefully cut the tape that seals the top flap of the shipping carton.

2. Remove the computer and the accessories Carton from the main shipping

carton (See Figure 2-1).

3. Remove all protective coverings from the computer.

4. Remove the holding tape and open up the accessory box; remove the

contents.

Note: Save the two shipping containers and packaging for later reuse.

Installation 2-1