Datasheet

ADC081C021, ADC081C027
SNAS447C FEBRUARY 2008REVISED MARCH 2013
www.ti.com
Address Pointer Register
The address pointer determines which of the data registers is accessed by the I
2
C interface. The first data byte
of every write operation is stored in the address pointer register. This value selects the register that the following
data bytes will be written to or read from. Only the three LSBs of this register are variable. The other bits must
always be written to as zeros. After a power-on reset, the pointer register defaults to all zeros (conversion result
register).
Default Value: 00h
P7 P6 P5 P4 P3 P2 P1 P0
0 0 0 0 0 Register Select
P2 P1 P0 REGISTER
0 0 0 Conversion Result (read only)
0 0 1 Alert Status (read/write)
0 1 0 Configuration (read/write)
0 1 1 Low Limit (read/write)
1 0 0 High Limit (read/write)
1 0 1 Hysteresis (read/write)
1 1 0 Lowest Conversion (read/write)
1 1 1 Highest Conversion (read/write)
Conversion Result Register
This register holds the result of the most recent conversion. In the normal mode, a new conversion is started
whenever this register is read. The conversion result data is in straight binary format with the MSB at D11.
Pointer Address 00h (Read Only)
Default Value: 0000h
D15 D14 D13 D12 D11 D10 D9 D8
Alert Flag Reserved Conversion Result [7:4]
D7 D6 D5 D4 D3 D2 D1 D0
Conversion Result [3:0] Reserved
Bits Name Description
15 Alert Flag This bit indicates when an alert condition has occurred. When the Alert Bit Enable is set in the
Configuration Register, this bit will be high if either alert flag is set in the Alert Status Register.
Otherwise, this bit is a zero. The I
2
C controller will typically read the Alert Status register and other data
registers to determine the source of the alert.
14:12 Reserved Always reads zeros.
11:4 Conversion Result The Analog-to-Digital conversion result. The Conversion result data is a 8-bit data word in straight
binary format. The MSB is D11.
3:0 Reserved Always reads zeros.
18 Submit Documentation Feedback Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: ADC081C021 ADC081C027