Datasheet
ADC1175
www.ti.com
SNAS012H –JANUARY 2000–REVISED APRIL 2013
ADC1175 8-Bit, 20MHz, 60mW A/D Converter
Check for Samples: ADC1175
1
FEATURES
DESCRIPTION
The ADC1175 is a low power, 20 Msps analog-to-
2
• Internal Sample-and-Hold Function
digital converter that digitizes signals to 8 bits while
• Single +5V Operation
consuming just 60 mW of power (typ). The ADC1175
• Internal Reference Bias Resistors
uses a unique architecture that achieves 7.5 Effective
Bits. Output formatting is straight binary coding.
• Industry Standard Pinout
• TRI-STATE Outputs
The excellent DC and AC characteristics of this
device, together with its low power consumption and
+5V single supply operation, make it ideally suited for
APPLICATIONS
many video, imaging and communications
• Video Digitization
applications, including use in portable equipment.
• Digital Still Cameras
Furthermore, the ADC1175 is resistant to latch-up
and the outputs are short-circuit proof. The top and
• Personal Computer Video Cameras
bottom of the ADC1175's reference ladder is
• CCD Imaging
available for connections, enabling a wide range of
• Electro-Optics
input possibilities.
The ADC1175 is offered in a TSSOP. It is designed
KEY SPECIFICATIONS
to operate over the commercial temperature range of
• Resolution 8Bits
-20°C to +75°C.
• Maximum Sampling Frequency 20Msps (min)
• DNL 0.75 LSB (max)
• ENOB 7.5 Bits (typ)
• Ensured No Missing Codes
• Power Consumption (excluding I
REF
) 60mW
(typ)
PIN CONFIGURATION
ADC1175 Pin Configuration
TSSOP Package
See Package Number PW
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2000–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.