DockMate Users Guide

5. Ensure that Use automatic settings is deselected.
Accept Configuration Changes
1. Select OK to close the System Properties window.
2. Close the Control Panel.
3. Select the Start icon at the bottom of your screen.
4. Select Shutdown.
5. Select Restart the computer.
6. Select Yes.
The notebook restarts and the error should be cleared.
All Windows 95 Systems
If you are still experiencing PCMCIA recognition problems
using a Windows 95 system, complete the following steps:
1. Open the Control Panel.
2. Select the PC Card (PCMCIA) icon.
3. Select the Global Setting tab.
4. Deselect Automatic Settings.
5. Change the Start field to 000C8000.
6. Change the End field to 007FFFFF.
7. Verify that the Length field is 00001000.
8. Select OK.
9. Select Yes to restart.
Windows for Workgroups v3.11
If you are running Windows for Workgroups v3.11, the
following instructions should clear problems with your
PCMCIA card:
PCMCIA Card Recognition
Troubleshooting Procedures 4-9