Analog Signal Chain Guide Amplifiers Data Converters Interface Clocks and Timing Sensing Wireless Connectivity www.ti.
Analog Signal Chain Guide Table of Contents Overview............................................................ 3 Interface Amplifiers and Comparators Signal Conditioners: Repeaters, Equalizers and Retimers.................. 97 Operational Amplifiers.......................................... 4 High-Speed Amplifiers....................................... 16 Instrumentation Amplifiers................................. 24 Logarithmic Amplifiers........................................
Analog Signal Chain Guide Overview The Real World Data Converter Amplifier Interface Low-Power RF Temperature Pressure Position Power Management Speed Flow Embedded Processing Humidity Sound Light Identification Amplifier Data Converter Clocks & Timing Logic Proven analog innovation Award-winning online analog design tools and support Analog signal chain products and solutions from Texas Instruments deliver performance, power, integration and size advantages that allow designers to differen
Amplifiers and Comparators Operational Amplifiers Precision, 20 MHz, 0.9 pA, Low-Noise, RRIO, CMOS Operational Amplifiers with Shutdown OPA320 The OPA320 series is ideal for low-power, single-supply applications. The OPA320 features a linear input stage with zero-crossover distortion that delivers excellent — common-mode rejection ratio (CMRR) of typically 114 dB, low-noise (7 nV/√Hz and total harmonic distortion plus noise of 0.0005% typical).
Amplifiers and Comparators Operational Amplifiers 23 MHz CMOS EMI Hardened Op Amp with 1.8 V Shutdown Logic LMV881 The LMV881 is a low power CMOS input operational amplifier that provides low input bias currents, a rail-to-rail output with high output drive capability and a wide temperature range of −40°C to +125°C. Additionally, the LMV881 is EMI hardened to minimize sensitivity to external interference.
Amplifiers and Comparators Operational Amplifiers 10-MHz, Low-Noise, RRO, 36 V Operational Amplifier in MicroPackages OPA172 The OPA172 family of single, dual and quad op amps are a series of 36 V low noise operational amplifiers that feature single supply, and MicroPackages with the ability to operate on supplies ranging from +2.7 V (±1.35 V) to +36 V (±18 V). They offer good offset, drift and bandwidth with low quiescent current. All versions have identical specifications for maximum design flexibility.
Amplifiers and Comparators Operational Amplifiers Low Offset Voltage Operational Amplifiers (VOS <500 µV) (sorted by VOS) Ch. IQ Per Slew VS Ch. GBW Rate VS (V) (V) (mA) (MHz) (V/µs) (min) (max) (max) (typ) (typ) VOS (25°C) (mV) (max) VOS Drift (µV/°C) (typ) IB (pA) (max) 1, 2 2.2 5.5 1.57 5 2.6 0.005 0.004 300 120 11 Y Out N 1, 2 1, 2 V at RailCMRR 1 NkHz (dB) (nV/√Hz) Single to- HiRel (typ) Supply Rail Avail.
Amplifiers and Comparators Operational Amplifiers Low Offset Voltage Operational Amplifiers (VOS <500 µV) (sorted by VOS) (continued) Device OPA836 OPA2836 OPA835 OPA2835 Description Ch. IQ Per Slew VS Ch.
Amplifiers and Comparators Operational Amplifiers Low-Power Operational Amplifiers (IQ <1000 µA) (sorted by IQ) (continued) IQ VS Per Ch. GBW VS (V) (V) (mA) (MHz) Device Description Ch. (min) (max) (max) (typ) 5.5 0.14 12 LMV65x Low Power, Low Voltage, 1, 2, 4 2.7 12 MHz 1, 2, 4 2.7 36 0.145 1 OPAy170 36 V Single-Supply, Low-Noise CMOS Amplifier in SOT553 5.5 0.15 0.9 OPAy378 Zero-Drift, GBW 0.9 MHz, 1, 2 2.2 Low IQ LMV641 Low Power, 12 V, 10 MHz 1 2.7 12 0.19 10 12 0.
Amplifiers and Comparators Operational Amplifiers Low-Noise Operational Amplifiers (VN ≤10 nV/√Hz) (sorted by VN) Ch. Slew IQ Per Rate VS VS Ch. GBW (V/ (V) (V) (mA) (MHz) µs) (min) (max) (max) (typ) (typ) VN at CMRR 1 kHz Rail(dB) (nV/√Hz) Single to- HiRel (min) (typ) Supply Rail Avail. VOS (25°C) (mV) (max) VOS Drift (µV/°C) (typ) IB (pA) (max) 4000 1100 0.78 0.45 23 82 0.69 Y N Device Description Package Price* LMH6629 Single Ultra Low Noise Wideband Op Amp 1 2.7 5.5 16.
Amplifiers and Comparators Operational Amplifiers Low-Noise Operational Amplifiers (VN ≤10 nV/√Hz) (sorted by VN) (continued) Ch. Slew IQ Per Rate VS VS Ch. GBW (V/ (V) (V) (mA) (MHz) µs) (min) (max) (max) (typ) (typ) VOS (25°C) (mV) (max) VOS Drift (µV/°C) (typ) IB (pA) (max) VN at CMRR 1 kHz Rail(dB) (nV/√Hz) Single to- HiRel (min) (typ) Supply Rail Avail. Device Description Package Price* LM6211 Low Noise RRO Amplifier w/CMOS Inputs and 24 V Operation 1 5 24 1.25 20.0 5.6 2.7 0.
Amplifiers and Comparators Operational Amplifiers Low Input Bias Current Operational Amplifiers (IB ≤10 pA) (sorted by IB) Device LMP7721 LMC6001 OPA129 OPAx320 LPV521 LMP223x OPA124 OPA602 Description 3 Femptoampere Input Bias Current Precision Amp Ultra Ultra-Low Input Current Amplifier Ultra-Low Bias, Difet Unit Ch. 1 IQ Per Slew VS VS Ch. GBW Rate (V) (V) (mA) (MHz) (V/µs) (min) (max) (max) (typ) (typ) 1.8 5.5 1.5 15 10.43 1 4.5 15.
Amplifiers and Comparators Operational Amplifiers Low Input Bias Current Operational Amplifiers (IB ≤10 pA) (sorted by IB) (continued) Device LPV531 LM7171 OPAx314 OPAx313 OPAy170 OPAy171 LMH6601 LM641 Description Ch. Programmable Micropower 1 CMOS Input Amplifier High Output Current, Voltage 1 Feedback Amplifier 3 MHz, Low-Power, Low- 1, 2, 4 Noise, RRI/O, 1.8 V CMOS Operational Amplifier 1-MHz, Micropower, Low2 Noise, Rail-to-Rail I/O 1.
Amplifiers and Comparators Operational Amplifiers Wide-Bandwidth Precision Operational Amplifiers (GBW >5 MHz) (sorted by GBW) (continued) VS VS (V) (V) (min) (max) 2.5 24 IQ Per Ch. (mA) (max) 1.15 GBW (MHz) (typ) 15 Slew VOS VOS Rate (25°C) Drift (V/µs) (mV) (µV/°C) (typ) (max) (typ) 12 5 2 IB (pA) (max) 2 VN at CMRR 1 kHz Rail(dB) (nV/√Hz) Single to- HiRel (min) (typ) Supply Rail Avail.
Amplifiers and Comparators Operational Amplifiers General Purpose Amplifiers Device Vs Vs (V) (V) Ch. (min) (max) IQ (25°C) VIO (25°C) (mV) Slew (max) Per Ch. IB (nA) GBW Rate CMRR Vn (mA) A (temp) (MHz) (V/µS) (dB) (1 kHz) (max) Standard Grade (max) RRIO (typ) (typ) (min) (nV/√Hz) Shutdown HiRel Avail. Standard Price* ‘A’ Grade Price* PDIP, SOIC, SOP, TSSOP, MSOP/VSSOP 0.10 0.11 Packages LM358 2 3 32 0.6 7 3 500 N 0.7 0.3 65 40 N N LM324 4 3 32 0.3 7 3 500 N 1.2 0.
Amplifiers and Comparators High-Speed Amplifiers (>50 MHz) 2.4 GHz Programmable Differential Amplifier with Gain Control LMH6881 The LMH6881 is a high-speed, high-performance, programmable differential amplifier. With a bandwidth of 2.4 GHz and high linearity of 44 dBm OIP3, it is suitable for a wide variety of signal conditioning applications. The LMH6881 programmable differential amplifier family combines the best of both fully differential amplifiers and variable gain amplifiers.
Amplifiers and Comparators High-Speed Amplifiers (>50 MHz) Ultra-Low-Power, Fully-Differential Operational Amplifier THS4531 The THS4531 is a low-power, fully-differential op amp with input common-mode range below the negative rail and rail-to-rail output. The device is designed for low-power data acquisition systems and high density applications where power consumption and dissipation is critical.
Amplifiers and Comparators High-Speed Amplifiers (>50 MHz) High-Speed Amplifiers Device Ch. BW BW Supply at ACL G = +2 Voltage ACL (MHz) (MHz) SHDN (V) (min) (typ) (typ) GBW Product (MHz) (typ) Settling Time Slew 0.10% Rate (ns) (V/µs) (typ) Distortion 1 VPP, G = 25 MHz HD2 (dBc) (typ) VN VOS HD3 (dBc) (nV/√Hz) (mV) (typ) (max) (typ) IB (µA) (max) IQ Per Ch. (mA) (typ) IOUT (mA) (typ) HiRel Avail. Package Price* 0.71/1.05/ 0.
Amplifiers and Comparators High-Speed Amplifiers (>50 MHz) High-Speed Amplifiers (continued) Device Ch. BW BW Supply at ACL G = +2 Voltage ACL (MHz) (MHz) SHDN (V) (min) (typ) (typ) GBW Product (MHz) (typ) Settling Time Slew 0.10% Rate (ns) (V/µs) (typ) Distortion 1 VPP, G = 25 MHz HD2 (dBc) (typ) IB (µA) (max) IQ Per Ch. (mA) (typ) IOUT (mA) (typ) HiRel Avail. 10 15 22 160 Y 4 6 18 100 2 VN VOS HD3 (dBc) (nV/√Hz) (mV) (typ) (max) (typ) Package Price* 2.
Amplifiers and Comparators High-Speed Amplifiers (>50 MHz) High-Speed Amplifiers (continued) Device Ch. BW BW Supply at ACL G = +2 Voltage ACL (MHz) (MHz) SHDN (V) (min) (typ) (typ) GBW Product (MHz) (typ) Settling Time Slew 0.10% Rate (ns) (V/µs) (typ) Distortion 1 VPP, G = 25 MHz HD2 (dBc) (typ) VN VOS HD3 (dBc) (nV/√Hz) (mV) (typ) (max) (typ) IB (µA) (max) IQ Per Ch. (mA) (typ) IOUT (mA) (typ) HiRel Avail.
Amplifiers and Comparators High-Speed Amplifiers (>50 MHz) High-Speed Amplifiers (continued) Device Ch. BW BW Supply at ACL G = +2 Voltage ACL (MHz) (MHz) SHDN (V) (min) (typ) (typ) Settling Time Slew 0.10% Rate (ns) (V/µs) (typ) GBW Product (MHz) (typ) Distortion 1 VPP, G = 25 MHz VN VOS HD3 (dBc) (nV/√Hz) (mV) (typ) (max) (typ) HD2 (dBc) (typ) IB (µA) (max) IQ Per Ch. (mA) (typ) IOUT (mA) (typ) HiRel Avail. Package Price* SOIC SOT23, SOIC 2.45 1.
Amplifiers and Comparators High-Speed Amplifiers (>50 MHz) Video Amplifiers (Sorted by Ascending G = +2 Bandwidth) (continued) Device OPAy357 Description VFB, Low Cost, SHDN OPAy830 Voltage Feedback –3 dB at 0.1 dB Supply G = +2 Gain Voltage Bandwidth Flatness Ch. SHDN (V) (MHz) (MHz) 1, 2 Y 2.5 to 5.5 100 40 Diff Gain (%) 0.02 Offset IQ Diff Voltage Per Ch. Input Phase Slew Rate (mV) (mA) Range HiRel (°) (V/µs) (max) (typ) (V) RRO Avail. Package Price* 0.09 150 8 4.9 –0.1 to 5.4 Y N SOT23, SOIC, 0.
Amplifiers and Comparators High-Speed Amplifiers (>50 MHz) Voltage-Controlled Amplifiers (continued) VN Device (nV/√Hz) < 50 MHz (continued) VCA2612 1.25 VCA2613 1 VCA2614 4.8 VCA2616/2611 0.95 VCA2619 5.9 VCA2615 0.7 > 50 MHz VCA2617 3.8 LMH6502 7.7 LMH6503 6.6 LMH6505 4.4 VCA820 6 VCA822 6 THS7530 1.27 VCA821 8.2 VCA824 8.
Amplifiers and Comparators Instrumentation Amplifiers Low Noise Instrumentation Amplifiers for Industrial Applications INA826 The INA826 36 V instrumentation amplifier enables accurate sensor measurement in the industrial environment by combining 200 µV offset voltage and input common mode range beyond the power supply rails. Operating from 2.7 V to 36 V on 200 µA operating current, the INA826 makes it easy to achieve precision measurements in single and bipolar supply applications.
Amplifiers and Comparators Instrumentation Amplifiers Instrumentation Amplifiers (continued) Device Description Gain Non Linearity (%) (max) Input Bias Current (nA) (max) Offset at G = 100 (µV) (max) Offset Drift (µV/°C) (max) CMRR at G = 100 (dB) (min) BW at Noise G = 100 1 kHz (kHz) (nV/√Hz) (min) (typ) Power Supply (V) IQ Per Amp (mA) (max) HiRel Avail. Package Price* Single Supply: Vsmax < = 5.5 V INA322 RRO, SHDN, Wide Temp, Low Cost 5 to 1000 0.015 0.01 10,000 71 60 25 100 2.
Amplifiers and Comparators Instrumentation Amplifiers Instrumentation Amplifiers (continued) Device Description Gain Non Linearity at G = 100 (%) (max) Offset (µV) (max) Offset Drift (µV/°C) (max) CMRR at G = 100 (dB) (min) BW Noise at at G = 100 1 kHz (kHz) (nV/√Hz) (typ) (typ) Power Supply (V) IQ (mA) HiRel (max) Avail. Package Price* Digitally Programmable Gain Amplifiers PGA103 Precision, Single-Ended Input 1, 10, 100 0.01 500 21 — 250 11 ±4.5 to ±18 3.5 N SOIC-8 4.
Amplifiers and Comparators Logarithmic Amplifiers Single-Supply, High-Speed, Precision Logarithmic Amplifier LOG114 Key Features • Advantages: Tiny for high-density systems Precision on one supply Fast over eight decades Fully tested function • Two scaling amplifiers • Wide input dynamic range: eight decades, 100 pA to 10 mA • 2.
Amplifiers and Comparators Power Amplifiers and Buffers 1.5 A, High-Current Power Amplifier OPA564 The OPA564 is a high-current operational amplifier ideal for driving up to 1.5 A in reactive loads and provides high reliability in demanding power-line communications and motor control applications. It operates from a single or dual power supply of ±3.5 V (7 V) to ±13 V (26 V). In single-supply operation, the input common-mode range extends below ground.
Amplifiers and Comparators Comparators Hex Window Comparator with 1.5% Precision and 400 mV Reference LMV7231 The LMV7231 is a 1.5% accurate Hex Window Comparator which can be used to monitor power supply voltages. The device uses an internal 400 mV reference for the comparator trip value. The comparator set points can be set via external resistor dividers. The LMV7231 has six outputs (CO1-CO6) that signal an under-voltage or over-voltage event for each power supply input.
Amplifiers and Comparators Comparators 40-ns, microPOWER, Push-Pull Output Comparators TLV3201/2 Key Features • Low propagation delay: 40 ns • Low quiescent current: 40 μA per channel • Input common-mode range extends 200 mV beyond either rail • Low input offset voltage: 1 mV • Push-pull outputs • Supply range: +2.7 V to +5.
Amplifiers and Comparators Comparators Comparators (continued) Device Description Ch. IQ Per Ch. (mA) (max) Output Current tRESP VS (mA) Low-to(V) (min) High (µs) (min) VS (V) (max) VOS (25°C) (mV) (max) Output Type HiRel Avail. Package Price* LM293 Dual, Differential 2 0.5 6 0.3 2 30 3 Open-Collector Y PDIP, SOIC 0.11 LM3302 Quad, General Purpose 4 0.2 6 0.3 2 28 20 Open-Drain/ Emitter N PDIP, SOIC 0.36 LM339 Quad, Differential 4 0.5 6 0.
Data Converters Analog-to-Digital Converters – Delta-Sigma ADCs 24-Bit Analog-to-Digital Converters for Temperature and Industrial Measurement ADS1246, ADS1247, ADS1248 The ADS1246, ADS1247 and ADS1248 are highly integrated, precision, 24-bit analogto-digital converters (ADCs). The ADS1246/7/8 feature an onboard, low-noise programmable gain amplifier (PGA), a precision delta-sigma (∆∑) ADC with a single-cycle settling digital filter and an internal oscillator.
Data Converters Analog-to-Digital Converters – Delta-Sigma ADCs Delta-Sigma ( ) ADCs Device Res. (Bits) Sample Rate (kSPS) Number of Input Channels Interface Input Voltage (V) VREF Linearity (%) Power (mW) HiRel Avail. Package Price* ADS1113 16 0.86 1 SE/1 Diff Serial, I2C ±2.048 Int 0.0015 0.3 N MSOP-10, x2QFN-10 1.85 ADS1114 16 0.86 1 SE/1 Diff Serial, I2C PGA (2/3-16), VDD Int 0.0015 0.3 N MSOP-10, x2QFN-10 2.00 ADS1115 16 0.
Data Converters Analog-to-Digital Converters – Delta-Sigma ADCs Delta-Sigma ADCs (continued) Res. (Bits) Sample Rate (kSPS) Number of Input Channels Interface Input Voltage (V) VREF Linearity (%) Power (mW) HiRel Avail. Package Price* ADS1220 24 2 4 SE/2 Diff Serial, SPI 5.5 Int/Ext 0.0015 0.4 N TSSOP-16, QFN-16 3.15 ADS1120 16 2 4 SE/2 Diff Serial, SPI 5.5 Int/Ext 0.0015 0.4 N TSSOP-16, QFN-16 2.30 Device ADS1245 24 0.015 1 SE/1 Diff Serial 2.5 Ext 0.0015 0.
Data Converters Analog-to-Digital Converters – SAR ADCs 2-Channel, 1 Msps, 12-/14-/16-Bit Simultaneous Sampling ADC with 2 Refs ADS7253/54, ADS7853/54, ADS8353/54 The ADS8353 family is the world’s smallest 2-channel, simultaneous sampling ADCs. With sampling speeds up to 1 MSPS and great AC performance like 90dB SNR and –98 dB THD at 100 kHz, the devices with internal references do not compromise on ADC specs for size and integration.
ADCs by Architecture Analog-to-Digital Converters – SAR ADCs Unipolar Input SAR ADCs Device Res. (Bits) Sample-Rate (kSPS) Power (mW) No. of Input Channels Interface Input Voltage (V) VREF Linearity (%) NMC SINAD (dB) HiRel Avail. Package Price* Int/Ext 0.0011 18 98 N 7x7 QFN, TQFP-48 23.40 Int/Ext Ext 0.0013 0.0011 18 18 92 100 N N 7x7 QFN, TQFP-48 QFN-10, VSSOP-10 QFN-10, VSSOP-10 6x6 QFN-28 6x6 QFN-28 19.80 19.
ADCs by Architecture Analog-to-Digital Converters – SAR ADCs Unipolar Input SAR ADCs (continued) Device Res. (Bits) SampleRate (kSPS) Power (mW) Number of Input Channels Interface Input Voltage (V) VREF Linearity (%) NMC SINAD (dB) HiRel Avail. Package Price* 16-Bit SAR ADCs (continued) ADS8319 16 500 18 1 SE, 1 PDiff Serial, SPI VREF (4.1) Ext 0.0023 16 93.8 N MSOP-10 8.00 ADS8332 16 500 10.6 8 SE, 8 PDiff Serial, SPI VREF (2.5) Int/Ext 0.0031 16 87.
ADCs by Architecture Analog-to-Digital Converters – SAR ADCs Unipolar Input SAR ADCs (continued) Device Res. (Bits) SampleRate (kSPS) Power (mW) Number of Input Channels Interface Input Voltage (V) VREF Linearity (%) NMC SINAD (dB) HiRel Avail. Package Price* 20 8 SE Serial, SPI 4 Int/Ext 0.006 14 81 N SOIC-24, TSSOP-24 6.40 14-Bit SAR ADCs (continued) TLC3548 14 200 TLC3544 14 200 20 4 SE Serial, SPI 4 Int/Ext 0.006 14 81 N SOIC-20, TSSOP-20 6.
ADCs by Architecture Analog-to-Digital Converters – SAR ADCs Unipolar Input SAR ADCs (continued) Device Res. (Bits) SampleRate (kSPS) Power (mW) Number of Input Channels Interface Input Voltage (V) VREF Linearity (%) NMC SINAD (dB) HiRel Avail. Package Price* 3.95 12-Bit SAR ADCs (continued) TLC2551 12 400 15 1 SE Serial, SPI VREF Ext 0.024 12 72 N SOIC-8, VSSOP-8 TLC2555 12 400 15 1 Diff Serial, SPI VREF Int 0.024 12 72 N SOIC-8, MSOP-8 3.95 TLC2558 12 400 9.
ADCs by Architecture Analog-to-Digital Converters – SAR ADCs Unipolar Input SAR ADCs (continued) Device Res. (Bits) SampleRate (kSPS) Power (mW) Number of Input Channels Interface Input Voltage (V) VREF Linearity (%) NMC SINAD (dB) HiRel Avail. Package Price* 12.5 8 SE Serial, SPI VREF (2.5 V) Ext 0.078 10 60 N TSSOP-30 2.70 10-Bit SAR ADCs (continued) ADS7955 10 1,000 ADC108S102 10 1,000 2.1 8 SE Serial, SPI VREF (5.25 V) Ext 0.019 10 61.8 N TSSOP-16 2.
ADCs by Architecture Analog-to-Digital Converters – SAR ADCs Unipolar Input SAR ADCs (continued) Device Res. (Bits) SampleRate (kSPS) Power (mW) Number of Input Channels Interface Input Voltage (V) VREF Linearity (%) NMC SINAD (dB) HiRel Avail.
ADCs by Architecture Analog-to-Digital Converters – SAR ADCs Bipolar Input SAR ADCs (continued) Device Res. (Bits) SampleRate (kSPS) Number of Input Channels Interface Input Voltage (V) VREF Linearity (%) NMC SINAD (dB) Power (mW) HiRel Avail. Package Price* 16-Bit Bipolar SAR ADCs (continued) ADS8509 16 250 1 SE Serial, SPI +4, 10, ±3.3, 5, 10 Int/Ext 0.003 16 86 70 N SOIC-20, SSOP-28 12.95 ADS8505 16 250 1 SE P8/P16 ±10 Int/Ext 0.
ADCs by Architecture Analog-to-Digital Converters – SAR ADCs Bipolar Input SAR ADCs (continued) Device Res. (Bits) SampleRate (kSPS) Number of Input Channels Interface Input Voltage (V) VREF Linearity (%) NMC SINAD (dB) Power (mW) HiRel Avail. Package Price* 12-Bit Bipolar SAR ADCs ADS7804 12 100 1 SE P8/P16 ±10 Int/Ext 0.011 12 72 81.5 N PDIP-28, SOIC-28 16.55 ADS7808 12 100 1 SE Serial, SPI +4, 10, ±3.3, 5, 10 Int/Ext 0.011 12 73 81.5 N SOIC-20 12.
Data Converters Analog-to-Digital Converters – Pipeline ADCs Dual 16-Bit 250 MSPS Analog-to-Digital Converter ADS42JB46/69 The ADS42JB49/69 is a family of high linearity dual channel 14- and 16-bit, 250 MSPS analog-to-digital converters (ADC). The ADS42xB49/69 family supports the JESD204B serial interface with data rates up to 3.125 Gbps as well as DDR and QDR LVDS interfaces.
Data Converters Analog-to-Digital Converters – Pipeline ADCs Dual 12-Bit 800 MSPS Analog-to-Digital Converter ADS5402 The ADS5402 is a high linearity dual channel 12-bit, 800 Msps analog-to-digital converter (ADC) easing front end filter design for wide bandwidth receivers. The analog input buffer isolates the internal switching of the on-chip track-and-hold from disturbing the signal source as well as providing a high-impedance input. Optionally the output data can be decimated by two.
Data Converters Analog-to-Digital Converters – Pipeline ADCs Pipeline ADCs Device Res. (Bits) SampleAnalog Input Rate No. of Input Input Bandwidth (MSPS) Channels Voltage (V) (MHz) DNL (± LSB) INL SFDR (± LSB) SNR (dB) (dB) Supply Voltage (V) HiRel Power (mW) Avail. Package Price* ADS42LB/JB69 16 250 2 Diff 2/2.5 650 TBD TBD 73.7 90 3.6,3.0 1480/1550 N QFN-64 185.00 ADS5485 16 200 1 Diff 3 730 0.99 10 75 87 4.75, 5.25 2160 N QFN-64 98.
Data Converters Analog-to-Digital Converters – Pipeline ADCs Pipeline ADCs (continued) Device SampleNo. of Res. Rate Input (Bits) (MSPS) Channels Input Voltage (V) Analog Input Bandwidth (MHz) DNL (± LSB) INL (± LSB) SNR (dB) SFDR (dB) Supply Voltage (V) Power (mW) HiRel Avail. Package Price* ADS5433 14 80 1 Diff 2.2 570 –0.95, 1.5 1.5 74 97.2 4.75, 5.25 1850 N HTQFP-52 48.00 ADS5542 14 80 1 Diff 2 750 –0.9, 1.1 5 72.9 88 3.0, 3.6 674 N HTQFP-64 25.
Data Converters Analog-to-Digital Converters – Pipeline ADCs Pipeline ADCs (continued) Device ADS41B29 ADS62P29 ADS4229 ADS5527 ADS6128 ADS62P28 ADS5525 ADC12C170/ V170 ADS4226 ADS4126 ADS5520 ADS6125 ADS4125 ADS6225 ADS62P25 ADS6425 ADS4225 ADS5521 ADS6124 ADS6224 ADS62P24 ADS6424 ADC12C105 ADC12DS080/ 105 ADC12DC080/ 105 ADC12C080 ADC12DL080 ADC12L080 ADS5410 ADS5522 ADS809 ADS6123 ADS61B23 ADS6223 ADS62P23 ADS6423 ADS808 ADS5273 ADC12L066 ADC12QS065 ADC12DL065 ADS4222 ADS5413 ADS5221 ADS6122 ADS5232 ADS
Data Converters Analog-to-Digital Converters – Pipeline ADCs Pipeline ADCs (continued) Device ADS5272 ADS5282 ADC12L063 ADS807 ADS2807 ADS5271 Res. (Bits) 12 12 12 12 12 12 SampleNo. of Analog Input Rate Input Input Bandwidth DNL INL (MSPS) Channels Voltage (V) (MHz) (± LSB) (±LSB) 65 8 Diff 1.5 300 0.95,1 2 65 8 Diff 2 520 0.3 1.5 62 1 Diff 2 170 0.5 1 53 1 SE/1 Diff 2 to 3 270 1 4 50 2 SE/2 Diff 2 to 3 270 1 5 50 8 Diff 1.5 300 0.9 2 SNR (dB) 71.1 70 66 69 65 70.
Data Converters Analog-to-Digital Converters – Pipeline ADCs Pipeline ADCs (continued) Device ADS5122 ADC10DL065 ADC10065 ADS823 ADS826 ADS5103 ADS821 ADS822 ADS825 THS1040 THS1041 ADS5203 ADS5204 ADS5120 ADS5121 ADC10D040 ADC10040 THS1030 THS1031 ADS820 ADS900 ADS901 ADC10D020 THS10082 THS1009 THS10064 THS1007 TLV1562 ADC08100/200 ADS831 ADS830 ADC08060 ADC08L060 TLC5540 THS0842 TLV5535 ADS931 ADS930 TLC5510 TLC5510A SampleRes.
Data Converters ADC by Architecture — Folding and Interpolating 12-Bit, 1.8/3.6 GSPS RF sampling ADC ADC12D1800RF The 12-bit 1.8 GSPS ADC12D1800RF is an RF-sampling GSPS ADC that can directly sample input frequencies up to and above 2.7 GHz. The ADC12D1800RF has excellent noise and linearity performance at RF frequencies, extending its usable range beyond the third Nyquist zone.
Data Converters Digital-to-Analog Converters – String and R2R DACs 12-/14-/16-Bit, Dual-Ch, Voltage-Output DAC in Tiny QFN-10 and MSOP-10 Packages DAC8562, DAC8162, DAC7562 This is a family of low-power, voltage-output, dual-channel, 12/14/16-bit DACs. These devices include a 2.5 V, 2ppm/°C internal reference, giving a full-scale output voltage range of 2.5 V or 5 V. The internal reference has an initial accuracy of 1 mV and can source up to 20 mA at the VREFIN/VREFOUT pin.
Data Converters Digital-to-Analog Converters – String and R2R DACs Precision DACs Device Res. (Bits) No. of INL DNL MonoDAC (max) (max) tonic Ch. (±LSB) (±LSB) (Bits) Settling Time (µs) (typ) Interface Power (mW) (typ) Output Type Output Range Programmability Output (V/mA) (min) Output (V/mA) (max) VREF HiRel Avail. 0 0 –16.
Data Converters Digital-to-Analog Converters – String and R2R DACs Precision DACs (continued) Device Res. (Bits) No. of INL DNL MonoDAC (max) (max) tonic Ch. (±LSB) (±LSB) (Bits) Settling Time (µs) (typ) Interface Power (mW) (typ) Output Type Output Range Programmability Output (V/mA) (min) Output (V/mA) (max) VREF HiRel Avail.
Data Converters Digital-to-Analog Converters – String and R2R DACs Precision DACs (continued) Device Res. (Bits) No. of INL DNL MonoDAC (max) (max) tonic Ch. (±LSB) (±LSB) (Bits) Settling Time (µs) (typ) Interface Power (mW) (typ) Output Type Output Range Programmability Output (V/mA) (min) Output (V/mA) (max) VREF HiRel Avail. Package Price* SOIC-16, TSSOP-16 SOIC-20, TSSOP-20 SOIC-20, PDIP-20 1.
Data Converters Digital-to-Analog Converters – String and R2R DACs Precision DACs (continued) Device Res. (Bits) No. of INL DNL MonoDAC (max) (max) tonic Ch. (±LSB) (±LSB) (Bits) Settling Time (µs) (typ) Interface Power (mW) (typ) Output Type Output Range Programmability Output (V/mA) (min) Output (V/mA) (max) VREF HiRel Avail.
Data Converters Digital-to-Analog Converters – String and R2R DACs Precision DACs (continued) Device Res. (Bits) No. of INL DNL MonoDAC (max) (max) tonic Ch. (±LSB) (±LSB) (Bits) Settling Time (µs) (typ) Interface Power (mW) (typ) Output Type Output Range Programmability Output (V/mA) (min) Output (V/mA) (max) VREF HiRel Avail.
Data Converters Digital-to-Analog Converters – Current Steering DACs Quad-Channel, 16-Bit, 1.5 GSPS DAC DAC34SH84 The DAC34SH84 is a very low-power, high-dynamic range, quad-channel, 16-bit digitalto-analog converter (DAC) with a sample rate as high as 1.5 GSPS. The device includes features that simplify the design of complex transmit architectures: 2× to 16× digital interpolation filters with over 90 dB of stop-band attenuation simplify the data interface and reconstruction filters.
Data Converters Digital-to-Analog Converters – Current Steering DACs Current Steering DACs Device DAC3482 Res. (Bits) 16 Supply (V) 1.2/3.3 Update Rate (MSPS) 1250 Settling Time (ns) 10.1 Number of Power (mW) DNL DACs (typ) (±LSB) (max) 2 800 2 INL (±LSB) (max) 4 HiRel Avail. Y Package QFN-88, BGA-196 Price* 29.95 DAC3484 16 1.2/3.3 1250 10.1 4 1200 2 4 Y QFN-88, BGA-196 58.60 DAC34H84 16 1.2/3.3 1250 10.1 4 1400 2 4 Y BGA-196 60.00 DAC34SH84 16 1.3/3.3 1500 10.
Data Converters Digital-to-Analog Converters – Digital Potentiometers 256-Tap Dual Potentiometer with I2C Interface in Industry’s Smallest Package TPL0102-100 The TPL0102-100 is a two channel, linear-taper digital potentiometer with 256 wiper positions and 100 kΩ end-to-end resistance. Each potentiometer can be used as a three-terminal potentiometer or as a two-terminal rheostat. It has non-volatile memory which can be used to store the wiper position which is loaded within 300 µs after power up.
Data Converters Integrated ADCs and DACs Integrated, Multichannel ADC and DAC for Analog Monitoring & Control AMC7812 Key Features • 12, 12-bit DACs with programmable outputs • DAC shutdown to user-defined level • 12-bit, 500 kSPS ADC with 16 inputs • Two remote temperature sensors and one internal temperature sensor • Input out-of-range alarms • 2.
Data Converters Analog Front Ends—Sensor AFEs Multi-Channel, Low-Power 24-Bit Sensor AFE with True Continuous Background Calibration LMP90100 The LMP90100 is a highly integrated, multi-channel, low-power 24-bit sensor AFE. The device features a precision, 24-bit Sigma Delta Analog-to-Digital Converter (ADC) with a low-noise programmable gain amplifier and a fully differential high impedance analog input multiplexer.
Data Converters Analog Front Ends – Medical Complete Low Power Integrated Analog Front End for ECG Applications ADS1293 The ADS1293 incorporates all features commonly required in portable, low-power medical, sports, and fitness electrocardiogram (ECG) applications. With high levels of integration and exceptional performance, the ADS1293 enables the creation of scalable medical instrumentation systems at significantly reduced size, power, and overall cost.
Data Converters Analog Front Ends – Medical Analog Front Ends for Ultrasound Device Channels Integration Power AFE5808 8 LNA+VCA+LPF+ADC+ CW 136 mW/Ch at 40 MSPS AFE5807 8 LNA+VCA+LPF+ADC+ CW 88 mW/Ch at 40 MSPS AFE5805 8 LNA+VCA+LPF+ADC 122 mW/Ch at 40 MSPS AFE5804 8 LNA+VCA+LPF+ADC 101 mW/Ch at 40 MSPS AFE5801 8 VCA+LPF+ADC 58 mW/Ch at 50 MSPS AFE5851 16 VCA+LPF+ADC 39 mW/Ch at 32.5 MSPS Noise ADC SNR Package Price* 0.75 nV/√Hz 77 dBFS 135-pin, 15x9mm 68.
Data Converters Analog Front Ends – Medical Embedded Processors with Integrated ADCs (continued) ADC ADC Channels Resolution Device ADC Sample-Rate Max Speed Flash ROM RAM Standby Current Active Current MAX GPIO Timers PWM Price* MSP430™ (continued) MSP430F5525 16 12 200 25 64 0 6 2.6 0.16 63 5 18 3.66 MSP430F2013 4 16 4 16 2 0 0.125 0.5 0.22 10 2 2 1.20 MSP430F478 5 16 32 8 48 0 2 1.1 0.28 48 3 6 5.00 MSP430F47176 6 16 32 16 92 0 8 1.1 0.
Monitoring and Control Motor Drivers Stepper Pre-Driver with On-chip 1/256 Micro-Stepping Indexer and Stall Detect DRV8711 The DRV8711 is a pre-driver IC for bipolar stepper motor drive applications. It provides four half bridge gate drivers, each capable of driving two external N-channel MOSFETs, one for the high side and one for the low side. It supports up to 400 mA sink and 200 mA source peak current output. The on-chip micro-stepping indexer supports step modes from full to 1/256-step.
Monitoring and Control Motor Drivers 5 A Brushed DC or Quad 1.75 A Solenoid/Relay Driver with Split Rail Support DRV8844 The DRV8844 provides four individually controllable 1/2-H-bridge drivers. It can be used to drive two DC motors, one stepper motor, four solenoids, or other loads. It supports both high side or low side switching when driving solenoids with the nonswitching FET acting as the catch diode.
Monitoring and Control Motor Drivers Industry’s Smallest 1.8 A Brushed DC Motor Driver DRV8837 The DRV8837 is an integrated motor driver IC for brushed DC motor drive applications. The output driver block consists of N-channel power MOSFETs configured as an H-bridge to drive the motor winding. An internal charge pump generates needed gatedrive voltages. The DRV8837 can supply up to 1.8 A of output current. It operates on a motor power-supply voltage of 1.8 V to 11 V, a device power-supply voltage of 1.
Monitoring and Control Motor Drivers Stepper Motor Controller IC DRV8825 The DRV8825 provides an integrated motor driver solution for printers, scanners and other automated equipment applications. The device has two H-bridge drivers and can drive a Bipolar stepper motor. Each of the output driver block consists of N-channel power MOSFET configured as full H-bridges to drive the motor windings. The DRV8825 can supply up to 2.5 A peak or 1.75 A RMS output current (with proper heatsinking at 24 V and 25°C).
Monitoring and Control Motor Drivers DRV8x Motor Drivers Device Description www.ti.com/motor Supply Voltage (V) IOUT Cont. (A) IOUT Peak (A) Control Interface Drives Solenoids Price* 0 to 52 0 to 52 8 to 45 8 to 45 8 to 32 8 to 45 8 to 45 8 to 45 8 to 45 3 7 1.1 1.75 1.5 2.1 3.5 3.5 1.75 6 12 1.6 2.5 1.5 3 5 5 2.5 PWM PWM Phase/Enable Phase/Enable Serial Phase/Enable Phase/Enable PWM PWM Yes (4x) Yes (4x) No No No No No Yes (2x) No 3.85 5.50 1.65 2.25 2.00 1.65 2.25 2.25 2.25 Ext FETs 1.9 2.
Monitoring and Control Motor Drivers DRV8x Motor Drivers (continued) Device Description www.ti.com/motor Supply Voltage (V) IOUT Cont. (A) IOUT Peak (A) Control Interface Drives Solenoids Price* Brushed DC Motors (continued) Low-Voltage Brushed Drivers DRV8830 1-A Brushed DC Driver w/on-Chip Speed Regulation 2.75 to 6.8 1 1 IN/IN No 0.85 DRV8832 1-A Brushed DC Driver w/on-Chip Speed Regulation 2.75 to 6.8 1 1 Serial No 0.85 DRV8833 Dual 2-A or Single 4-A Brushed DC Driver 2.
Monitoring and Control Haptic Drivers DRV2667 Industry’s Most Highly Integrated Piezo Haptic Driver DRV2667 Haptics is a technology that makes use of motor vibrations to create tactile response in electronics, providing feedback that you can feel in addition to what you see and hear. TI’s DRV2667 is a highly integrated piezo haptic driver featuring advanced digital interface, configurable boost converter and high voltage amplifier.
Monitoring and Control Haptic Drivers Haptic Drivers Deliver Unmatched Performance and 123 Royalty-Free Haptic Effects DRV2604/5 Haptics has been popular in gaming and mobile phones and TI’s DRV2604/5 ERM/ LRA haptic drivers make it easy to integrate haptics into any touch-enabled consumer or industrial application. Enhancing the user experience presents a number of design challenges, including software programming, system diagnostics, motor calibration and haptic effect generation.
Monitoring and Control Touch-Screen Controllers Resistive Single Touch Screen Controller with Integrated Haptics Driver TSC2011 The TSC2011 is a very low power touch screen controller designed to work with a low cost four-wire resistive touch sensor but also includes a comprehensive set of haptic feedbacks to provide a complete human machine interface.
Monitoring and Control Pulse-Width Modulation Sensor Signal Conditioning IC for Closed-Loop Magnetic-Current Sensor DRV411 Key Features • Optimized for symmetic hall elements AKM HW-302, HW-322, or similar • Spinning current excitation Elimination of hall offset, drift, and low frequency noise • Extended current measurement range H-Bridge output drive: 250 mA • Precision differential amplifier Offset/Drift: 100 µV max, 1 µV/°C max 200 kHz system bandwidth • Precision reference Accuracy: 0.
Monitoring and Control Current Shunt Monitors/Current Sense Amplifiers Triple Channel Shunt and Bus Voltage Monitor INA3221 The INA3221 is a three-channel, high-side current and bus voltage monitor with an I2C interface. The INA3221 monitors both shunt voltage drops and bus supply voltages in addition to having programmable conversion times and averaging modes for these signals. The INA3221 offers both critical and warning alerts to detect multiple programmable out-of-range conditions for each channel.
Monitoring and Control Current Shunt Monitors/Current Sense Amplifiers Current Shunt Monitors Device Description Gain (V/V) Offset Offset Drift (µV) (µV/ºC) (max) (max) CMRR (dB) (typ) BW (kHz) (typ) Output Voltage Swing (V) (min) Power Supply (V) IQ (mA) (max) HiRel Avail. Package Price* 1 1 120 115 800 440 0 to V (+) –0.8 0 to V (+) –1.2 2.7 to 36 2.7 to 40 0.045 0.125 Y Y SOT23-5 SOT23-5 0.65 0.65 Standard Common Mode Voltage (<= 60 V), Analog Current Output INA138 INA139 +2.
Monitoring and Control Temperature Sensors Single-Chip Monolithic Thermopile Sensor in WCSP TMP006 The TMP006 is an infrared thermopile sensor that measures the temperature of an object without the need to make contact with the object. The sensor has an object temperature range from –40°C to +125°C to enable use in a wide range of applications. Low power consumption along with low operating voltage enables system power savings. Increasing wavelength 0.
Monitoring and Control Temperature Sensors 2.4 V, 10 µA, SC70, Temperature Sensor LMT88 Key Features • Cost-effective alternative to thermistors • Very low power consumption • Highly linear output • Simple to use • Rated for full −55°C to +130°C range • Available in an SC70 package • Predictable curvature error The LMT88 is a precision analog output CMOS integrated-circuit temperature sensor that operates over a −55°C to 130°C temperature range. The power supply operating range is 2.4 V to 5.5 V.
Monitoring and Control Temperature Sensors Analog Temperature Sensors (continued) Device LM60 Description 2.7 V, SOT23 or TO-92 Temperature Sensor Accuracy Over Temp Range (˚C) (max) 2 LM61 LM62 2.7 V, SOT23 or TO-92 Temperature Sensor 2.7 V, SOT23 or TO-92 Temperature Sensor 2 2 LMT84 1.
Monitoring and Control Temperature Sensors Remote Temperature Sensors Remote Local Sensor Sensor Accuracy Accuracy Over Temp Over Temp Range Range (˚C) (max) (˚C) (max) Remote Sensor Temp Range (˚C) Supply Voltage (V) IQ (µA) (typ) HiRel Avail. Package Price* Device Description Feature LM82 Remote Diode and Local Digital Temp Sensor with Two-Wire Interface Remote Diode Fault Detection 3 3 –40 to 125 3 to 3.6 800 N SSOP-16 1.
Monitoring and Control Temperature Sensors Remote Temperature Sensors (continued) Remote Local Sensor Sensor Accuracy Accuracy Over Temp Over Temp Range Range (˚C) (max) (˚C) (max) Remote Sensor Temp Range (˚C) Supply Voltage (V) IQ (µA) (typ) HiRel Avail. Device Description Feature Package Price* TMP431 Remote and Local Temp Sensor with Programmable n-Factor and Beta Correction Beta Correction, n-Factor Correction, Series Resistance Cancellation, Fault Detection, Alert Flag 1 2.
Monitoring and Control Temperature Sensors Digital Temperature Sensors (continued) Accuracy Over Temp Range (˚C) (max) Specified Temp Range (˚C) Temp Resolution (Bits) Supply Voltage (V) IQ (µA) (typ) HiRel Avail. 2, 3 –25 to +85, –40 to +125 9 to 12 2.7 to 5.5 50 Device Description I2C/SMBus Package Price* Interface (continued) TMP106 Chipscale Digital Temp Sensor with 2.7 V to 5.0 V Logic N 1 mm x 1.5 mm WCSP-6 0.
Monitoring and Control Temperature Sensors Fan Controllers Device AMC80 LM63 LM64 LM80 LM81 LM87 LM93 Description System Hardware Monitor with Two-Wire/ SMBus Serial Interface Accurate Remote Diode Digital Temperature Sensor w/ Integrated Fan Control ±1°C Remote Diode Temperature Sensor with PWM Fan Control and 5 GPIO Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor Serial Interface System Hardware Monitor
Monitoring and Control 4-20 mA Transmitters Single-Channel 16-/12-Bit Programmable Current Output and Voltge Output DAC for 4-mA to 20-mA Current Loop Applications DAC8760/DAC7760 The DAC7760 and DAC8760 are low-cost, precision, fully-integrated 12-bit and 16-bit digital-to-analog converters (DACs), and are designed to meet the requirements of industrial process control applications.
Voltage References Voltage References 3ppm/°C Drift, 0.05% Accurate, Low-Noise, Precision Series Voltage References REF5020, REF5025, REF5030, REF5040, REF5045, REF5050, REF5010 Key Features • High accuracy: 0.05% • Low temperature drift: 3 ppm/°C (max) • Very low noise: 3 µVPP/V • High output current: ±10 mA • Wide supply range: 2.
Voltage References Voltage References Voltage References (continued) Device Description Output (V) Initial Accuracy Drift (%) (ppm/°C) (max) (max) Long-Term Stability (ppm/1000hr) (typ) Noise 0.1 to 10Hz (µVp-p/V) (typ) IQ Temperature (mA) Range (max) (°C) Output Current (mA) HiRel Avail. Package Price* N SOT23-3 0.85 N 3TO-92, SOIC-8, TSSOP-8 SOT23-3, 3TO-92, SOT23-5 SOT23-3, SOT23-5 0.22 Shunt REF1112 µPower, 1.25 V Shunt 1.25 0.2 30 60 20 0.0015 –40 to +125 LM3852.
Clocks and Timing Clock Distribution (Fanout Buffers, Zero-Delay Buffers) Differential Clock Buffer with Dividers CDCUN1208LP The CDCUN1208LP is a 2:8 fan-out buffer featuring a wide operating supply range, two universal differential/single-ended inputs, and universal outputs (HCSL, LVDS, or LVCMOS) with edge rate control. The state of certain pins determines device configuration at power up. Alternately, the CDCUN1208LP provides a SPI/I2C port with which a host processor controls device settings.
Clocks and Timing Clock Distribution (Fanout Buffers, Zero-Delay Buffers) 3.1-GHz Differential Clock Buffer/Level Translator LMK00304 The LMK00304 is a 3-GHz four-output differential fanout buffer intended for highfrequency, low-jitter clock/data distribution and level translation. The input clock can be selected from two universal inputs or one crystal input. The selected input clock is distributed to two banks of two differential outputs and one LVCMOS output.
Clocks and Timing Clock Distribution (Fanout Buffers, Zero-Delay Buffers) Fanout Buffers Device Description Input Level Output Level Frequency (MHz) VCC (V) Propagation Delay Output Skew (max) (ps) Char. Temp. (ºC) HiRel Avail. Package Price* LVPECL/LVDS/LVCMOS LVPECL 0 to 2 GHz 2.5/3.3 450 ps (max) 10 ps –40 to 85 N QFN-16 2.50 LVPECL/LVDS/LVCMOS LVPECL 0 to 2 GHz 2.5/3.3 450 ps (max) 15 ps –40 to 85 N QFN-16 3.30 LVPECL/LVDS/LVCMOS LVPECL 0 to 2 GHz 2.5/3.
Clocks and Timing Clocks Distribution (Fanout Buffers, Zero-Delay Buffers) Fanout Buffers (continued) Device Description Input Level Output Level Frequency (MHz) VCC (V) Propagation Delay Output Skew (max) (ps) Char. Temp. (ºC) HiRel Avail.
Clocks and Timing Clocks Distribution (Fanout Buffers, Zero-Delay Buffers) Fanout Buffers (continued) Device Description Input Level Output Level Frequency (MHz) VCC (V) Propagation Delay Output Skew (max) (ps) Char. Temp. (ºC) Hi-Rel Avail. Package Price* 30 ps (LVPECL), 1.6 ns (LVCMOS) –40 to 85 N QFN-24 5.90 1.6 ns (typ) –40 to 85 N QFN-16 4.70 30 ps –40 to 85 Y QFN-24 3.15 Dividers CDCM1804 1:3 LVPECL + 1:1 LVCMOS Buffer with Dividers LVPECL LVPECL/LVCMOS 800 3.
Clocks and Timing Clock Generation (Crystal Oscillator Replacements, Jitter Cleaners) Clock Generator/Jitter Cleaner with Internal VCO Output CDCM6208 The CDCM6208 is a highly versatile, low jitter low power frequency synthesizer which can generate eight low jitter clock outputs, selectable from one of two inputs that can feature a low frequency crystal or CML, LVPECL, LVDS, or LVCMOS signals for a variety of wireless infrastructure baseband, wireline data communication, computing, low power medical imagin
Clocks and Timing Clock Generation (Crystal Oscillator Replacements, Jitter Cleaners) Clock Generation Device Output Level Frequency (MHz) VCC (V) RMS or Period (pk-pk) Jitter Phase Error Output Skew (max) (ps) Char. Temp. (ºC) HiRel Avail. LVPECL/LVDS/ LVCMOS/ Crystal LVPECL/ LVDS/ LVCMOS 2.27 to 2600 3.3 <0.15 ps rms (typ, XO mode) — 30 (LVPECL/ LVDS) –40 to 85 N LLP-64 7.
Clocks and Timing Clock Generation (Crystal Oscillator Replacements, Jitter Cleaners) Clock Generation (continued) Device Description Output Level Frequency (MHz) VCC (V) RMS or Period (pk-pk) Jitter Phase Error Output Skew (max) (ps) Crystal/ LVCMOS 1.8 V LVCMOS 0 to 230 1.8/3.3 60 ps (typ) — 150 –40 to 85 Crystal/ LVCMOS 2.5/3.3 V LVCMOS 0 to 230 1.8/3.3 60 ps (typ) — 150 Crystal/ LVCMOS 1.8 V LVCMOS 0 to 230 1.8/3.
Clocks and Timing Clock Generation (Crystal Oscillator Replacements, Jitter Cleaners) Clock Generation (continued) Device Description Output Skew (max) (ps) Char. Temp. (ºC) HiRel Avail. Package Price* Input Level Output Level Frequency (MHz) VCC (V) RMS or Period (pkpk) Jitter LVCMOS/ LVPECL LVCMOS/ LVPECL 0 to 1500 3.3 <1 ps rms –200/ +100 ps 50 –40 to 85 Y BGA-64/ QFN-48 9.50 LVPECL/LVDS/ LVCMOS LVPECL/ LVDS/ LVCMOS LVPECL/ LVDS LVPECL 0 to 1500 3.
Interface We offer: • Industry standard footprint of highspeed data buffers supporting multiple signaling technologies up to 3.
Interface Signal Conditioners: Repeaters, Equalizers and Retimers Signal Conditioners: Repeaters, Equalizers, Retimers Device DS125DF410 DS110DF410 DS100DF410 DS125RT410 DS110RT410 DS100RT410 SN65LVCP1414 SN65LVCP1412 DS125BR401 DS125BR800 TLK1102E TLK1101E DS100BR410 DS100BR111 DS100BR210 DS64BR401 TLK6201EA SN75LVCP601 SN75LVCP600S DS42BR400 DS25BR440 DS25BR100 1Bi-directional support Channels 4 4 4 4 4 4 4 2 81 8 2 1 4 21 2 81 1 2 1 81 4 1 2Includes Function Retimer with DFE Retimer with DFE Retimer
Interface Crosspoint and Redundancy MUX 14.2 Gbps Quad Mux, Linear-Redriver with Signal Conditioning SN65LVCP114 The SN65LVCP114 is an asynchronous, protocol-agnostic, low-latency quad mux, linear-redriver optimized for use in systems operating at up to 14.2 Gbps. The device linearly compensates for channel loss in backplane and active-cable applications.
Interface Crosspoint and Redundancy MUX Crosspoint and Redundancy MUX Device SN65LVCP114 DS100MB203 DS64MB201 DS42MB200 DS42MB100 SN65LVCP408 SN65LVCP404 SN65LVCP402 DS25CP104A DS25CP102 SN65LVCP202 SN65LVCP204 SN65LVDS250 SN65LVDS122 SN65LVCP23/22 Protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Multi-protocol Switch/ Mux x4 (2:1/1:2)
Interface Communications – Data Buffers and Translators (LVDS, M-LVDS, PECL/ECL) LVDS Device Description No. of Tx No. of Rx Input Signal Output Signal Signaling Rate (Mbps) Partto-Part Skew Max (ps) Tx tpd Typ. (ns) Rx tpd Typ. (ns) ICC Max (mA) ESD HBM (kV) Supply Voltage (V) HiRel Avail. Package Price* Single Family SN65LVDS1 Driver 1 — LVTTL LVDS 630 — 1.7 — 8 15 3.3 N SOIC-8, SOP-5 0.47 SN65LVDS2 Receiver — 1 LVDS LVTTL 400 — 1.7 2.6 7 15 3.
Interface Communications – Data Buffers and Translators (LVDS, M-LVDS, PECL/ECL) (continued) LVDS Device Description No. of Tx No. of Rx Input Signal Output Signal Signaling Rate (Mbps) Partto-Part Skew Max (ps) Tx tpd Typ. (ns) Rx tpd Typ. (ns) ICC Max (mA) ESD HBM (kV) Supply Voltage (V) HiRel Avail. Package Price* Quad Family (continued) SN65LVDS391 Driver with FlowThrough Pinout 4 — LVTTL LVDS 630 1500 1.7 — 26 15 3.3 N SOIC-16, TSSOP-16 1.
Interface Communications – Data Buffers and Translators (LVDS, M-LVDS, PECL/ECL) M-LVDS (continued) Output Signal Signaling Rate (Mbps) Partto-Part Skew Max (ps) Tx tpd Typ. (ns) Rx tpd Typ. (ns) ICC Max (mA) ESD HBM (kV) TIA/ EIA-899 Standard Compliance HiRel Avail. Package Price* LVTTL, M-LVDS LVTTL, M-LVDS 200 1000 1.5 4 24 8 Yes N SOIC-8 1.85 Full LVTTL, M-LVDS LVTTL, M-LVDS 200 1000 1.5 4 24 8 Yes N SOIC-14 1.85 — — LVTTL M-LVDS 200 1000 1.
Interface Communications – Data Buffers and Translators (LVDS, M-LVDS, PECL/ECL) PECL/ECL No. of Tx No. of Rx Input Signal Output Signal Frequency Tpd typ (pS) ICC Max (mA) ESD HBM (kV) Supply Voltage (V) HiRel Avail. SN65EL11 2 1 ECL/PECL Package Pinout Price* ECL/PECL 1.
Interface SerDes (Serial Gigabit Transceivers) Quad-Channel XAUI/10 GBASE-KR Transceiver TLK10034 The TLK10034 is a quad-channel multi-rate transceiver intended for use in high-speed bi-directional point-to-point data transmission systems. This device supports three primary modes. It can be used as a XAUI to 10 GBASE-KR transceiver, as a generalpurpose 8b/10b multi-rate 4:1, 2:1, or 1:1 serializer/deserializer, or can be used in 1 G-KX mode. The four TLK10034 channels are fully independent.
Interface SerDes (Serial Gigabit Transceivers) SerDes (Serial Gigabit Transceivers) Serial I/F1 Parallel I/F Power Special Features HiRel Avail. Price* 0.5 to 10.3125 Gbps 2-CML 4-CML 1600 mW — N 38.00 Quad-Channel XAUI/10GBASE-KR Transceiver 0.5 to 10.3125 Gbps 4-CML 4-CML 900 mW / channel — N 45.00 TLK10232 Dual-Channel XAUI/10GBASE-KR Transceiver with Crosspoint 0.5 to 10.3125 Gbps 4-CML 4-CML 900 mW/ channel — N Web TLK1221 Single-Ch.
Interface Consumer/Computing – USB SuperSpeed USB Transceiver with PIPE3 and ULPI Interfaces TUSB1310 The TUSB1310 is a single-port, 5.0 Gbps USB 3.0 physical layer transceiver operating off of a single crystal or an external reference clock. The TUSB1310 provides a clock to USB link layer controllers. The single reference clock allows the TUSB1310 to provide a cost-effective USB 3.0 solution with few external components and a minimum implementation cost.
Interface Consumer/Computing – USB SuperSpeed USB-to-SATA bridge TUSB9261 The TUSB9261 is a SuperSpeed USB function controller with integrated USB-compliant transceivers. It is intended as a USB-to-SATA bridge for storage devices using the SATA interface. The TUSB9261 is designed to use both the fast performance of the state machine and the programmability and flexibility of the embedded microcontroller (MCU) and firmware.
Interface Consumer/Computing – USB USB Device Description Max USB Speed Application Processor Interface ESD HBM (kV) HiRel Avail. Package Price* 0.55 0.55 6.00 0.55 USB Transcivers (PHYs) TUSB1105 TUSB1106 Advanced USB Full-Speed Transceiver Advanced USB Full-Speed Transceiver Full Full Single or Differential Differential ±15 ±15 N N TUSB1210 TUSB1211 USB 2.0 ULPI Transceiver USB 2.
Interface Consumer/Computing – USB USB 2.0 Signal Switches VCC (VDD) Device TS3USB221 Description High-Speed USB 2.0 (480 Mbps) 1:2 Mux/ Demux Switch with Single Enable TS3USB221A High-Speed USB 2.0 (480 Mbps) 1:2 Mux/ Demux Switch with Single Enable with 12 kV HBM ESD Protection TS3USB31 High-Speed USB 2.0 (480 Mbps) 1:1 Switch TS3USB31E High-Speed USB 2.0 (480 Mbps) 1:1 Switch with 15 kV HBM ESD Protection TS5USBA224 USB 2.0 High-Speed (480 Mbps) and Audio Switches with Negative Signal Capability and 1.
Interface Consumer/Computing – 1394 IEEE P1394b Three-Port Cable Transceiver Arbiter TSB81BA3E The TSB81BA3E provides the digital and analog transceiver functions needed to implement a three-port node in a cable-based IEEE 1394 network.The transceivers include circuitry to monitor the line conditions as needed for determining connection status, for initialization and arbitration, and for packet reception and transmission.
Interface Consumer/Computing – 1394 1394 PHY Ports Voltage (V) Data Rate (Mbps) HiRel Avail. Package Price* IEEE 1394a One-Port Cable Transceiver/Arbiter 1 3.3 Up to 400 N HTQFP-48/64, BGA-64/80 MicroStar Junior™ 1.50 TSB41AB2 IEEE 1394a Two-Port Cable Transceiver/Arbiter 2 3.3 Up to 400 N HTQFP-64 1.85 TSB41AB3 IEEE 1394a Three-Port Cable Transceiver/Arbiter 3 3.3 Up to 400 Y HTQFP-80 3.00 TSB41BA3D S400-Capable 1394b Physical Layer (PHY) 3 3.3 Up to 400 N HTQFP-80 6.
Interface Consumer/Computing – DisplayPort Switch/Redriver DisplayPort 1:2 Switch with Integrated TMDS Translator SN75DP122A The SN75DP122A is a one dual-mode DisplayPort input to one dual-mode DisplayPort output or one TMDS output. The TMDS output has a built-in level translator compliant with Digital Video Interface (DVI) 1.0 and High Definition Multimedia Interface (HDMI) 1.3b.
Interface Consumer/Computing – Flatlink™/FPD-LINK High Definition Image Sensor Receiver SN65LVDS324 Key Features • Bridges the interface between video image sensors and processors • Outputs 1.8 V CMOS with 10-/12-/14/16-bits at 18.5 MHz to 162 MHz • SubLVDS inputs support up to 648 Mbps • Integrated 100 Ω differential input termination • Test image generation feature • Compatible with TI OMAP™ and DaVinci™ Including DM385, DM8127, DM36x, and DMVA • Low power 1.
Interface Consumer/Computing – Flatlink™/FPD-LINK (continued) FlatLink™/FPD-LINK LVDS Receivers and Transmitters Device Description Parallel Inputs or Outputs Serial Chs. Data Throughput (Mbps) PLL Frequency (MHz) Supply Voltage (V) HiRel Avail. Package Price* FlatLink LVDS Transmitter SN75LVDS84A FlatLink Transmitter 21 3 1575 31 to 75 3.3 N TSSOP-48 2.35 SN75LVDS83B FlatLink 10-135 MHz Transmitter 28 4 3780 10 to 135 3.3 N BGA-56 MicroStar Junior™, TSSOP-56 2.
Interface SerDes – Automotive 24-Bit Color FPD-Link III Deserializers with Bidirectional Control Channel DS90UB925Q-Q1, DS90UB926Q-Q1 Key Features • Bidirectional control interface channel interface with I2C • compatible serial control bus • Supports high definition (720p) digital video format • RGB888 + VS, HS, DE and synchronized I2S audio supported • 5 to 85 MHz PCLK supported • Single 3.3 V operation with 1.8 V or 3.
Interface SerDes – Video and Imaging 3 Gbps HD/SD SDI Low Power Reclocker with Eye Monitor LMH0366 Key Features • SMPTE ST 424, SMPTE ST 292, and SMPTE ST 259-C compliant • Supports 125 Mbps, 270 Mbps, 1.4835 Gbps, 1.485 Gbps, 2.967 Gbps, and 2.
Interface SerDes – Video and Imaging Broadcast and Professional Video – Serial Digital Interface (continued) Device Description Max Data Power Supply Rate Consumption Voltage (Mbps) (mW) (V) In/Out Count ESD HB (kV) Temp. Range (ºC) Power Down Mode Control Interface LMH0346 3 Gbps HD/SD SDI Reclocker with Dual Differential Outputs 2970 365 3.3 1/2 8 –40 to 85 N Pin/ SMBus LMH0056 HD/SD SDI Reclocker with 4:1 Input Multiplexer 1485 360 3.
Interface SerDes – Video and Imaging 10 to 50 MHz DC-Balanced Channel Link III Bidirectional Control Serializer DS92LX1621/2 The DS92LX1621 / DS92LX1622 chipset offers a Channel Link III interface with a highspeed forward channel and a full-duplex back channel for data transmission over a single differential pair. The Serializer/Deserializer pair is targeted for direct connections between automotive camera systems and Host Controller/Electronic Control Unit (ECU).
Interface Consumer/Computing – PCI x1 PCI Express to PCI Bus Translation Bridger XIO2001 The XIO2001 is a single-function PCI Express® to PCI translation bridge that is fully compliant to the PCI Express to PCI/PCI-X bridge specification, revision 1.0. For downstream traffic, the bridge simultaneously supports up to eight posted and four non-posted transactions. For upstream traffic, up to six posted and four non-posted transactions are simultaneously supported.
Interface Consumer/Computing – PCI PCI Express® (continued) Device Description Supply Voltage Range (V) Architecture rON (typ) (Ω) tpd (typ) (ns) HiRel Avail. Package Price* PCI Express Signal Switches TS2PCIE2212 2-Channel PCIe 2:1 Multiplexer/Demultiplexer Passive FET Switch 1.7 to 1.9 2:1 10 0.25 N BGA-48 1.65 TS2PCIE412 4-Channel PCIe 2:1 Multiplexer/Demultiplexer Passive FET Switch 1.5 to 2.1 2:1 12.5 0.25 N QFN-42 0.95 *Suggested resale price in U.S.
Interface Industrial – CAN Transceivers Industrial CAN Transceivers SN65HVD255/6/7 These CAN transceivers meet the ISO1189-2 High Speed CAN (Controller Area Network) Physical Layer standard. They are designed for data rates in excess of 1 megabit per second (Mbps) in short networks or CAN FD applications, and enhanced timing margin and higher data rates in long and highly-loaded networks. These devices provide many protection features to enhance device and CAN-network robustness.
Interface Industrial – Digital Isolators Low-Power, Bidirectional I2C Isolators ISO1540/1 The ISO1540 and ISO1541 are low-power, bidirectional isolators that are compatible with I2C interfaces. These devices have their logic input and output buffers separated by TI’s Capacitive Isolation technology using a silicon dioxide (SiO2) barrier.
Interface Industrial – Digital Isolators Digital Isolators Isolation Rating (Vrms) 2500 Channel Direction 1/0 Max Data Rate (Mbps) 100/150 Min Transient Immunity (kV/µs) 25 Supply Voltage (V) 3.3, 5 HiRel Avail. Y Package SOIC-8 Price* 1.20/1.
Interface Industrial – Digital Isolators Analog Isolators Device Description Isolated Delta-Sigma Modulator AMC1204 Isolated 20 MHz DS Modulator AMC1204B Isolated 20 MHz DS Modulator AMC1203 Isolated 10 MHz DS Modulator Isolated Amplifier AMC1200 Isolated Amplifier with G=8 AMC1200B Isolated Amplifier with G=8 AMC1100 Isolated Amplifier with G=8 Input Voltage Range (mV) Isolation Rating (Vpeak) Min Transient Immunity (kV/µS) Supply Voltage (V) Hirel Avail.
Interface Industrial – Ethernet PHY Industrial Temp, Single Port 10/100 Mbs Ethernet PHY TLK105/6 The TLK10x is a single-port Ethernet PHY for 10 Base-T and 100 Base TX signaling, integrating all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables. The device supports the standard Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) for direct connection to a Media Access Controller (MAC).
Interface Industrial – Ethernet PHY Mini LS Commercial Temperature Single Port 10/100 Mb/s Ethernet Transceiver DP83848J/M The DP83848J/M addresses the quality, reliability and small form factor required for space sensitive applications in embedded systems. MII/RMII Clock Source Status LED/s DP83848J/M functional block diagram Get more information: www.ti.com/product/DP83848J, www.ti.
Interface Industrial – Ethernet Single-Port Industrial 10/100 Ethernet PHY Device Interface Cable Length (m) No.
Interface Industrial – RS-485/RS-422 3.3 V-Supply RS-485 with IEC ESD Protection SN65HVD72/75/78 These devices have robust 3.3 V drivers and receivers in a small package for demanding industrial applications. The bus pins are robust to ESD events, with high levels of protection to Human-Body Model and IEC Contact Discharge specifications. These devices each combine a differential driver and a differential receiver, which operate from a single 3.3-V power supply.
Interface Industrial – RS-485/RS-422 RS-485 (continued) Device DR/ Supply RX Duplex (V) Features Signaling Isolated Rate (Mbps) ESD (kV) Receiver Fail-Safe Nodes Package HiRel Avail.
Interface Industrial – RS-485/RS-422 RS-485 (continued) Device DR/ Supply RX Duplex (V) Features Signaling Isolated Rate (Mbps) ESD (kV) Receiver Fail-Safe Nodes Package HiRel Avail. Price* PROFIBUS Transceivers SN65HVD1176 1/1 Half 5 ProfiBus (EN 50170) Transceiver No 40 10 Short, Open, Idle 160 SOIC-8 N 1.55 ISO1176 1/1 Half 5 Isolated ProfiBus Transceiver Yes 40 16 Short, Open, Idle 160 SOIC-16 N 3.
Interface Other Line Circuit AISG On-Off Keying Coax Modem Transceiver SN65HVD62 This transceiver modulates and demodulates signals between the logic (baseband) and a frequency suitable for long coaxial media and is designed to be compliant with Antenna Interface Standards Group v2.0 specification. The HVD62 receiver integrates an active bandpass filter to enable demodulation of signals even in the presence of spurious frequency components. The filter has a 2.176 MHz center frequency.
Interface Other Line Circuit IO-LINK PHY for Device Nodes SN65HVD101/2 The SN65HVD101/2 IO-LINK PHYs implement the IO-LINK interface for industrial point-to-point communication. When the device is connected to an IO-Link master through a 3-wire interface, the master can initiate communication and exchange data with the remote node while the SN65HVD10X acts as a complete physical layer for the communication.
Interface SerDes – Industrial Eight-Channel, 0-34 V Digital-Input Serializer with 5 V Vcc for Industrial Digital Inputs SN65HVS885 The SN65HVS885 is an eight-channel, digital-input serializer for high-channel density digital input modules in industrial and building automation. Operating from a 5 V supply, the device accepts field input voltages of up to 34 V.
Interface General – UARTs Dual UART with 64-Byte FIFO TL16C752C The TL16C752C is a dual universal asynchronous receiver/transmitter (UART) with 64-byte FIFOs, automatic hardware/software flow control and data rates up to 3 Mbps. It incorporates the functionality of two UARTs, each UART having its own register set and FIFOs. The two UARTs share only the data bus interface and clock source; otherwise they operate independently.
Interface General – UARTs UARTs Channel(s) FIFOs Voltage (V) Characterized Temp. (°C) HiRel Avail. Package Price* Dual UART with Programmable Auto-RTS and Auto-CTS 2 16-Byte 1.8/2.5/3.3/5 –40 to 85 N QFN-32, TQFP-48 2.20 TL16C2552 Dual UART with Programmable Auto-RTS and Auto-CTS 2 16-Byte 1.8/2.5/3.3/5 –40 to 85 N PLCC-44 2.90 TL16C2752 Dual UART with Customizable Trigger Levels 2 64-Byte 1.8/2.5/3.3/5 –40 to 85 N PLCC-44 3.
Interface General – ESD/EMI HDMI Companion Chip with Step-Up DC/DC, I2C Level Shifter and High-Speed ESD Clamps TPD12S015 The TPD12S015 is an integrated HDMI ESD solution. The device pin mapping matches the HDMI type C/D connector with four differential pairs. This device offers eight lowcapacitance ESD clamps, allowing HDMI 1.3 data rates.
Interface General – ESD/EMI ESD/EMI Description Number of Channels I/O Capacitance (pF) VBR (min) (V) SN65220 USB 2.0 FS 2 35 SN65240 USB 2.0 FS 4 35 SN75240 USB 2.0 FS 4 35 TPD4E002 USB 2.0 HS 4 TPD2E001 USB 2.0 HS 2 TPD2E007 Audio, RS-232, RS-485, CAN 2 Device HiRel Avail. Package Price* 7 Y DSBGA-4, SOT23-6 0.26 7 N PDIP-8, TSSOP-8 0.24 7 N PDIP-8, TSSOP-8 0.42 11 6 N SOT-5 0.14 1.5 11 N SOT-5, SON-6 0.15 10 ±14 N DCK-3, DSLGA-4 0.20 2 0.
Interface General – I2C Enhanced I2C Controlled Keypad Scan IC TCA8418E The TCA8418E is an enhanced keypad scan device. It can operate from 1.65 V to 3.6 V and has 18 general-purpose inputs/outputs (GPIO) that can be used to support up to 80 keys via the I2C interface [serial clock [SCL], serial data [SDA]). The key controller includes an oscillator that debounces at 50 ms and maintains a 10 byte FIFO of key-press and release events that can store up to 10 keys with overflow wrap capability.
Interface General – I2C I2C Device Description No. of Outputs fSCLK (max) (kHz) HiRel Avail. Package Price* 2 2 2 2 5 2 400 400 400 400 400 400 N N N N N N PDIP-8, SOIC-8 MSOP-8, PDIP-8, SOIC-8, TSSOP-8 MSOP-8, PDIP-8, SOIC-8, SON-8, TSSOP-8 MSOP-8, SOIC-8 SOIC-20, SSOP-20, SSOP-20/QSOP, TSSOP-20 MSOP-8, SOIC-8 1.60 1.60 0.95 1.05 0.85 1.45 I/O Bits fSCLK (max) (kHz) HiRel Avail. Package Price* 8 400 N SOIC-8 1.05 8 400 N 0.
Interface General – RS-232 RS-232 Data Rate Device (kbps) DS14C88 20 DS14C89A 20 DS14C232 20 SN75LBC241 100 MAX202 120 MAX207 120 MAX208 120 MAX211 120 MAX213 120 SN75196 120 SN75C1406 120 SN75C185 120 GD65232 120 GD75232 120 GD75323 120 LT1030 120 SN65C1406 120 DS14C238 120 SN75185 120 SN75LBC187 120 TL145406 120 UA9636A 120 UC5170C 120 UC5180C 120 UC5181C 120 SN75LV4737A 128 DS14C335 128 DS14C535 128 DS14185 200 MAX222 200 MAX232E 250 MAX3386E 250 TRSF23243 250 MAX3221E 250 MAX3232E 250 SN75C23243 250 SN
Interface General – Voltage-Level Translators RS-232 (continued) Device TRSF3238E TRSF3243 TRS3253E SN75154 SN75189A SN75C189A Data Rate (kbps) 1000 1000 1000 1000 1000 1000 Drivers Receivers 5 3 3 5 3 4 4 0 4 0 4 Main Supply Voltage (NOM) (V) 3.3 or 5 3.3 or 5 3.3 or 5 5 5 5 Logic Voltage (Min) (V) 3.3 3.3 1.8 5 5 5 Driver Supply Voltage (NOM) (V) — — — 12 — — HiRel/ AEC-Q100 ESD HBM (kV) Avail. IEC61000-4-2 N/N ±15 N/N IEC61000-4-2 N/N — N/N — N/N — N ICC (max) (mA) 2 1 1 35/40 26 0.
Radio Frequency Broadband RF Wideband Frequency Synthesizer with Integrated VCO LMX2581 The LMX2581 is an ultra-low noise wideband frequency synthesizer which integrates a delta-sigma fractional N PLL, a VCO with fully integrated tank circuit, and an optional frequency divider. The LMX2581 integrates several low-noise, high-precision LDOs to provide superior supply noise immunity and more consistent performance.
Radio Frequency Broadband RF High-Performance Quadrature Modulators Device Frequency (min) (MHz) Frequency (max) (MHz) OIP3 (dBm) P1dB (dBm) Noise Floor (dBm/Hz) I/Q Common-Mode Voltage (typ) (V) HiRel Available Price* 350 300 400 350 50 4000 4000 4000 4000 6000 23 30 26.5 21 26.5 9.5 13 12 9.5 12 –160 –160 –163 –160 –163 1.5 0.25 1.7 3.3 1.7 N N N N N 4.95 5.10 5.35 4.95 5.
Radio Frequency Wireless Connectivity Single-Mode Bluetooth® Low Energy System-on-Chip CC2541 The CC2541 is a power-optimized system-on-chip (SoC) for both low energy and proprietary 2.4-GHz applications. It enables robust network nodes to be built with low total bill-of-material costs. The CC2541 combines the excellent performance of a leading RF transceiver with an industry-standard enhanced 8051 MCU, in-system programmable Flash, 8-KB RAM, and many other powerful supporting features and peripherals.
Radio Frequency Wireless Connectivity High Performance RF Transceiver for Narrowband Systems CC1120 The CC1120 is a fully integrated single-chip radio transceiver designed for high performance at low power and low voltage operation in cost effective wireless systems. All filters are integrated, removing the need for costly external SAW and IF filters.
Radio Frequency Wi-Fi®/IEEE 802.11 SimpleLink™ Wi-Fi Module CC3000, CC3000-TiWi-SL, CC3000-TypeVK The CC3000 is a self-contained wireless solution that simplifies the process of implementing Internet connectivity. SimpleLink™ Wi-Fi minimizes host microcontroller (MCU) software requirements making it the ideal solution for embedded applications using any low-cost/low-power MCU.
Radio Frequency Wireless Connectivity Wireless Connectivity Frequency Range Device Type Data Rate (Max) (max) (kbps) TX Power (max) (dBm) RX Current Sensitivity Wakeup Time (Lowest) (Best) (PD-->RX/TX) (mA) (dBm) (µS) Flash Size (KB) RAM Size (KB) Device Description Package Price* CC1120 High Performance RF Transceiver for Narrowband Systems 164 to 192 MHz 410 to 480 MHz 820 to 960 MHz Transceiver 200 kbps 45 mA at 17 mA / 14 dBm 2 mA sniff mode –127 400 µs PD to Idle, 166 µs Idle to RX/
Easy-to-Use Design Tools. Custom Results. WEBENCH® Design Center Use the popular WEBENCH® designer tools to simultaneously compare performance across multiple parameters for complete systems – including efficiency, size, and cost – in seconds. Get instant access to the latest simulation models, parametric data, and package information for power, lighting, and sensing applications. > Optimize your design in seconds > Simulate your results > Order a prototype ti.
TI University Program offers universities the industry’s broadest Analog and Embedded Processing portfolio via discounted tools, free products, and lab donations. From teaching materials to design projects, TI technologies fuel the passions of students and educators in universities worldwide. Add TI to your curriculum, contact: www.ti.com/univcontacts TI university program www.ti.
TI Worldwide Technical Support Internet TI Semiconductor Product Information Center Home Page support.ti.com TI E2E™ Community Home Page e2e.ti.com Product Information Centers Americas Phone +1(512) 434-1560 Brazil Phone 0800-891-2616 Mexico Phone 0800-670-7544 Fax Internet/Email +1(972) 927-6377 support.ti.com/sc/pic/americas.
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
