Datasheet
ADS1247EVM-PDK Kit Operation
www.ti.com
8.2 Setting Up the ADS1247EVM-PDK
The ADS1247EVM-PDK contains both the ADS1247EVM and the MMB3 motherboard; however, the
devices are shipped unconnected. Follow these steps to set up the ADS1247EVM-PDK.
Step 1. Unpack the ADS1247EVM-PDK kit.
Step 2. Set the switches on the MMB3 as described below, as shown in Figure 6.
• Set switch SW4 to the right.
• Set the DAC switch (SW5) to the OUT position (to the right).
Figure 6. MMB3 Switch Locations
10
ADS1147EVM, ADS1247EVM, ADS1147EVM-PDK, ADS1247EVM-PDK SBAU148B– June 2009– Revised May 2011
Submit Documentation Feedback
Copyright © 2009–2011, Texas Instruments Incorporated