Datasheet

www.ti.com ADS1247EVM-PDK Kit Operation
Step 3. Plug the ADS1247EVM into the MMB3 as Figure 7 illustrates.
Figure 7. Connecting ADS1247EVM to MMB3
CAUTION
Do not misalign the pins when plugging the ADS1247EVM into the MMB3.
Check the pin alignment carefully before applying power to the PDK.
Step 4. Set the jumpers and switches on the ADS1247EVM as shown in Figure 3 (note that these
settings are the factory-configured settings for the EVM).
11
SBAU148B– June 2009– Revised May 2011 ADS1147EVM, ADS1247EVM, ADS1147EVM-PDK, ADS1247EVM-PDK
Submit Documentation Feedback
Copyright © 2009–2011, Texas Instruments Incorporated