Datasheet

www.ti.com Evaluating Performance with the ADCPro Software
Input pins AIN2-AIN3 can be selected to be an analog input or GPIO. If an input is to be used as a GPIO,
check the GPIO box as shown in Figure 16.
Figure 16. I/O Config Tab
When an input is selected as a GPIO, its label turns green and the IDAC controls for that channel are
disabled.
19
SBAU148B– June 2009– Revised May 2011 ADS1147EVM, ADS1247EVM, ADS1147EVM-PDK, ADS1247EVM-PDK
Submit Documentation Feedback
Copyright © 2009–2011, Texas Instruments Incorporated