Datasheet

ADS1247EVM-PDK Kit Operation www.ti.com
Switch the BSL switch (SW4) on the MMB3 to the BSL position (to the left) as instructed, then press OK.
The plug-in will download the firmware to the MMB3. This operation may take a couple of minutes, so the
progress is updated in the message at the top of the ADS1247 plug-in window (as Figure 13 shows). The
firmware is saved in flash memory on the MMB3, so this operation should only need to be performed
once.
Figure 13. Firmware Download Progress Indicator
16
ADS1147EVM, ADS1247EVM, ADS1147EVM-PDK, ADS1247EVM-PDK SBAU148B– June 2009– Revised May 2011
Submit Documentation Feedback
Copyright © 2009–2011, Texas Instruments Incorporated