Datasheet

www.ti.com

ADS1256EVM-PDK Kit Operation

8.4.1 NI-VISA USB Device Driver Installation

1. After the ADCPro software is installed, apply power to the PDK and connect the board to an available

PC USB port.

2. The computer should recognize new hardware and begin installing the drivers for the hardware.

Figure 16 through Figure 19 are provided for reference to show the installation steps.

• For the first screen (Figure 16), it is not necessary to search for the software; it has already been

installed to your PC.

• For the remaining steps, accept the default settings.

Figure 16. NI-VISA Driver Installation Wizard, Screen 1

Figure 17. NI-VISA Driver Installation Wizard, Screen 2

SBAU090C–November 2003–Revised July 2010 ADS1256EVM and ADS1256EVM-PDK