Datasheet

Using the ADS1298ECG-FE Software

www.ti.com

3 Using the ADS1298ECG-FE Software

The ADS1298ECG-FE software provides complete control over all the settings of the ADS1298. By using

the user interface (UI), the ADS1298 control registers can be manipulated to evaluate the various options

available on the device. Figure 3 shows the starting UI screen of the software. The UI consists of a user

menu (Section 3.1), a few top-level controls (Section 3.2), and a tabbed interface, with different functions

available on the different tabs. The tabs are:

• About (Section 3.3)

• ADC Register (Section 3.4.3)

• Analysis (Section 3.5)

• Save (Section 3.6)

Figure 3. Software Start Screen/About Tab

The user can adjust the settings when the software is not acquiring data. During acquisition, all controls

are disabled and settings may not be changed. When a setting is changed via a control, the settings are

immediately updated on the device and EVM. Settings in the software correspond to settings described in

the ADS1298 product data sheet.

ADS1298ECG-FE/ADS1198ECG-FE SBAU171C–May 2010–Revised September 2012

Submit Documentation Feedback