Datasheet

www.ti.com

Using the ADS1298ECG-FE Software

3.6 Save Tab

The Save tab provides the user the ability to save the collected data for a record of the evaluation or

further analysis. Reference the previous sections for the list of the anlaysis data available for each

analysis.

The Analysis to Save group allows the user to save the different analysis calculations that were performed

on the data.

• Scope Analysis saves the scope analysis data available from the scope analysis pop-up window

• FFT Analysis saves the FFT analysis data available from the FFT analysis pop-up window.

• Histogram Analysis saves the histogram analysis data available from the histogram analysis pop-up

window.

• Register Settings saves the current settings from the register map and can be useful to obtain the

confused with saving your register settings for reloading into the software at another time (see

Section 3.1).

Each item will be saved if the corresponding checkbox is checked.

The Data to Save group allows the user to save the various data sets collected from the ADS1298. The

CH x controls allow the user to specify which channels will be saved for each of the data selections made.

• Data - Codes selects the raw data (in codes format) to be saved to a file.

• Data - Volts selects the raw data (converted to voltage) to be saved to a file.

• FFT Data selects the calculated FFT data to be saved to a file. Note: This is not raw data; it is the

frequency bin and magnitude data that was calculated by the UI.

• Histogram Data selected the calculated Histogram data to be saved to a file. Note: This is not raw

data; it is the code bin and number of occurrences data that was calculated by the UI.

The User Comments/Notes group allows the user to indicate a Record Number and User Comments

that are saved with each file. This data permits the user to distinguish different data sets from one

another.

The Directory to Save Files is the directory where all the saved files will be placed. The user can select a

directory by pressing the folder button (located to the right of the control). Each data file that is saved is

automatically named to prevent overwriting of files.

The Save To File button saves all the data files that were selected using the checkboxes to the selected

directory.

SBAU171C–May 2010–Revised September 2012 ADS1298ECG-FE/ADS1198ECG-FE

Submit Documentation Feedback