Datasheet

www.ti.com

Appendix B External Optional Hardware

B.1 Optional External Hardware (Not Included)

The input of the ADS1x98ECG-FE requires a DB15 connector. Figure 45 illustrates the most optimal cable

connection to the ADS1298ECG-FE. Figure 46 and Figure 47 show two alternate ways that cables can be

constructed to interface with the ADS1x98ECG-FE. Figure 48 shows an alternate testing tool to the

instrument used in the tests for this user guide (refer to Section 5.7.1).

Figure 45. 15-Pin, Shielded Connector from Biometric Cables

Figure 46. 15-Pin, Twisted Wire Cable to Banana Jacks Figure 47. 15-Pin, Twisted Wire Cable

SBAU171C–May 2010–Revised September 2012 External Optional Hardware

Submit Documentation Feedback