Datasheet

I C connector on TLV320AIC3262 stick EVM

1. SCL

2. SDA

3. GND

4. IOV

Appendix A

SLAU448–June 2012

TLV320AIC3262 Stick EVM EEPROM

Image Programming Guide

1. Install the TotalPhaseUSB-v2.10 driver using TotalPhaseUSB-v2.10.exe. This driver installation file is

located at: \\vette02\dg_audio\USERS\Austin\software.

2. Open the Aardvark™ GUI by double-clicking on Aardvark GUI.exe. Aardvark GUI is located at:

\\vette02\dg_audio\USERS\Austin\software\aardvark-gui-windows-v3.53.

3. Setup the hardware.

• Build the I

(SDA, SCL, IOV

, GND) connection between the Aardvark GUI and the

TLV320AIC3262 stick EVM.

SCL SDA NC + 5 V GND

Aardvark GUI 1 3 4 2

TLV320AIC3262 I

C connector 1 2 4 3

• Connect the Aardvark GUI to a PC through USB cable. Now the Aardvark GUI will be recognized

as the Total Phase Aardvark I

C/SPI Host Adaptor under the windows device manager.

4. Program the TUSB3200 firmware (\\vette02\dg_audio\USERS\Austin\software\TUSB3200 image)

• Open the Aardvark GUI and click Configure Aardvark Adaptor

• Highlight the Aardvark port and select Batch Mode, then click okay.

TLV320AIC3262 Stick EVM EEPROM Image Programming Guide SLAU448–June 2012

Submit Documentation Feedback