Datasheet
ABSOLUTE MAXIMUM RATINGS
DISSIPATION RATINGS
AMC1210
SBAS372D – APRIL 2006 – REVISED MAY 2009 ..............................................................................................................................................................
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
SPECIFIED
PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT MEDIA,
PRODUCT PACKAGE-LEAD DESIGNATOR RANGE MARKING NUMBER QUANTITY
AMC1210IRHAT Tape and Reel, 250
AMC1210 QFN-40 RHA – 40 ° C to +125 ° C AMC1210I
AMC1210IRHAR Tape and Reel, 2500
(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com .
Over operating free-air temperature range, unless otherwise noted.
(1)
AMC1210 UNIT
Supply voltage, all supplies (AVDD, BVDD, CVDD, DVDD) to GND – 0.3 to +6 V
Digital input to GND GND – 0.3 to BVDD + 0.3 V
Ground voltage difference, AGND to GND ± 0.3 V
Input current to any pin except supply pins – 10 to +10 mA
Power dissipation See Dissipation Ratings Table
Operating virtual junction temperature range, T
J
– 40 to +150 ° C
Operating free-air temperature range, T
A
– 40 to +125 ° C
Storage temperature range, T
STG
– 65 to +150 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under the Electrical Characteristics
is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability.
T
A
≤ +25 ° C DERATING FACTOR T
A
= +70 ° C T
A
= +85 ° C T
A
= +125 ° C
PACKAGE POWER RATING ABOVE T
A
= +25 ° C POWER RATING POWER RATING POWER RATING
RHA
(1)
3787mW 30.3mW/ ° C 2424mW 1969mW 758mW
(1) The thermal resistance (junction-to-ambient) of the RHA package is 32 ° C/W.
2 Submit Documentation Feedback Copyright © 2006 – 2009, Texas Instruments Incorporated
Product Folder Link(s): AMC1210