Datasheet

High-Level Threshold Register (addresses 0x04, 0x0A, 0x10 and 0x16)
Low-Level Threshold Register (addresses 0x05, 0x0B, 0x11 and 0x17)
AMC1210
SBAS372D APRIL 2006 REVISED MAY 2009 ..............................................................................................................................................................
www.ti.com
The High-Level Threshold Register contains the upper level value of the interrupt threshold for the comparator
filter. If the value of the comparator filter is equal to or above the high level threshold, the corresponding interrupt
flag is set (if enabled). Table 17 describes the High-Level Threshold Register.
Table 17. High-Level Threshold Register
Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
HLT14 HLT13 HLT12 HLT11 HLT10 HLT9 HLT8 HLT7 HLT6 HLT5 HLT4 HLT3 HLT2 HLT1 HLT0
'0' '1' '1' '1' '1' '1' '1' '1' '1' '1' '1' '1' '1' '1' '1' '1'
R RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW
BIT POSITION BIT DESCRIPTION
15 Unused. Always read '0'.
14 0 HTL14 HLT0 Unsigned high level threshold for the comparator filter output.
The Low-Level Threshold Register contains the lower level of the interrupt threshold for the comparator filter. If
the value of the comparator filter is equal to or below the low level threshold, the corresponding interrupt flag is
set (if enabled). Table 18 describes the Low-Level Threshold Register.
Table 18. Low-Level Threshold Register
Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
LLT14 LLT13 LLT12 LLT11 LLT10 LLT9 LLT8 LLT7 LLT6 LLT5 LLT4 LLT3 LLT2 LLT1 LLT0
'0' '0' '0' '0' '0' '0' '0' '0' '0' '0' '0' '0' '0' '0' '0' '0'
R RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW
BIT POSITION BIT DESCRIPTION
15 Unused. Always read '0'.
14 0 LTL14 LLT0 Unsigned low level threshold for the comparator filter output.
32 Submit Documentation Feedback Copyright © 2006 2009, Texas Instruments Incorporated
Product Folder Link(s): AMC1210