Owner's Manual

Entering Data and Computing Results
Because the Depreciation worksheet stores values and settings until you either
change them or clear the worksheet, you should not have to perform every step
each time you work a problem.
Selecting a Depreciation Method
1. To access the Depreciation worksheet, press & p. The current
depreciation method is displayed.
2. To clear the worksheet, press & z.
3. Press & V until you display the depreciation method you want (
SL,
SLF, SYD, DB, DBX, or DBF).
Note: If you select DB or DBX, you must either key in a value or accept the
default of 200.
Entering Depreciation Data
1. To display
LIF, press #.
2. Key in a value for LIF and press !.
3. Repeat steps 1 and 2 for M01, DT1 (if SLF), CST, SAL, and YR.
Note: To select SLF or DBF, you must set either the European date or European
separator format first. Setting Calculator Formats
Computing Results for DEP, RBV, and RDV
After entering the data, press # once for each of the
DEP, RBV, and RDV
variables to display the computed values.
Note: The 7 _ indicator confirms that the displayed value is computed.
Generating a Depreciation Schedule
To generate a depreciation schedule and compute values for other years:
1. To display
YR, press #.
2. To increment the value by one, press C.
3. To compute new values for DEP, RBV, and RDV, press # for each
variable.
Depreciation Worksheet 61