User's Manual

BiWaze® Clear System - User Manual Page | 32
3. Edit the Lock Device Options by
checking or unchecking the appropriate
parameters. When a parameter is
unchecked, it is not visible or Off. When
a parameter is checked it will be visible
or On when the system is locked.
4. Press SAVE.
Note: When the software is locked,
therapies can't be edited unless Allow User
Adjustment is enabled. This option allows
the user to adjust pressures and time within
the range set under the Administrator
screens.
7.2 Unlock Feature
When the software is unlocked, all therapy settings are unrestricted to the user. This mode is primarily
utilized by trained clinicians or advanced users with proper training. Users have complete access to
adjust therapy settings based on the physiological needs of the patient.
7.2.1 Unlocking
1. Press the blue padlock icon on the top left .
2. Enter the numeric password and press the check mark. The password is only available to trained
healthcare professionals.
3. The software will be unlocked and available to
configure.
8. Cleaning and Maintenance
8.1 Cleaning the Control Unit
WARNING - Remove the power cord from the device and wall outlet before cleaning the control unit.
The control unit’s exterior surface should be cleaned before and after each patient use and more often if
needed.