Datasheet

www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
RECOMMENDED OPERATING CONDITIONS
DISSIPATION RATINGS
(1)
bq2406x
SLUS689A – JUNE 2006 – REVISED OCTOBER 2006
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
AVAILABLE OPTIONS
Safety Power Pack Voltage
Charge Input Over Termination IC Pack
Timer Good Detection Devices
(1) (2) (3)
Marking
Voltage Voltage Enable Enable Temp
Enable Status (Absent)
With timer
4.2 V 6.5 V TMR pin TMR pin PG pin No TS pin bq24060 BPG
enabled
With timer
4.2 V 6.5 V TMR pin TMR pin PG pin CE pin No bq24061 BPH
enabled
With termination
4.2 V 6.5 V TE pin TMR pin No CE pin No bq24063 Preview
enabled
With timer
4.2 V 10.5 V TMR pin TMR pin PG pin No TS pin bq24064 BSA
enabled
(1) The bq2406x are only available taped and reeled. Add suffix R to the part number for quantities of 3,000 devices per reel (e.g.,
bq24060BPGR). Add suffix T to the part number for quantities of 250 devices per reel (e.g., bq24060DRCT).
(2) This product is RoHS compatible, including a lead concentration that does not exceed 0.1% of total product weight, and is suitable for
use in specified lead-free soldering processes. In addition, this product uses package materials that do not contain halogens, including
bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
Web site at www.ti.com .
bq2406x
Supply voltage (IN with respect to Vss) –0.3 V to 18 V
(2)
Input voltage on IN, STATx, PG, TS, CE, TE, TMR (all with respect to Vss) –0.3 V to V(IN)
Input voltage on OUT, BAT, ISET (all with respect to Vss) –0.3 V to 7 V
Output sink current (STATx) + PG 15 mA
Output current (OUT pin) 1.5 A
T
A
Operating free-air temperature range –40 ° C to 155 ° C
T
stg
Storage temperature range –65 ° C to 150 ° C
T
J
Junction temperature range –40 ° C to 150 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability
(2) The bq2406x device can withstand up to 26 V for a maximum of 87 hours.
MIN TYP MAX UNIT
V
(IN)
Supply voltage range Battery absent detection not functional 3.5 4.35 V
V
(IN)
Supply voltage range Battery absent detection functional 4.35 16.5 V
T
J
Junction temperature 0 125 ° C
R
TMR
33K ≤ R
TMR
≤ 100K
PACKAGE θ
JC
( ° C/W) θ
JA
( ° C/W)
10-pin DRC 3.21 46.87
(1) This data is based on using the JEDEC High-K board and the exposed die pad is connected to a Cu
pad on the board. This is connected to the ground plane by a 2×3 via matrix.
2
Submit Documentation Feedback