Datasheet

bq24100, bq24103, bq24103A
bq24104, bq24105, bq24108, bq24109
bq24113, bq24113A, bq24115
SLUS606O –JUNE 2004–REVISED MARCH 2010 www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION
(1)
T
J
CHARGE REGULATION VOLTAGE (V) INTENDED APPLICATION PART NUMBER
(2) (3)
MARKINGS
bq24100RHLR CIA
4.2 V Stand-alone
bq24100RHLT CIA
bq24103RHLR CID
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V) Stand-alone
bq24103RHLT CID
bq24103ARHLR CKO
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V) Stand-alone
bq24103ARHLT CKO
bq24104RHLR NXW
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V)
Stand-alone
(Blinking status pins)
bq24104RHLT NXW
bq24105RHLR CIF
–40°C to 125°C Externally programmable (2.1 V to 15.5 V) Stand-alone
bq24105RHLT CIF
bq24108RHLR CIU
4.2 V (Blinking status pins) Stand-alone
bq24109RHLR CDY
bq24113RHLR CIJ
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V) System-controlled
bq24113RHLT CIJ
bq24113ARHLR CKF
1 or 2 cells selectable (CELLS pin, 4.2 V or 8.4 V) System-controlled
bq24113ARHLT CKF
bq24115RHLR CIL
Externally programmable (2.1 V to 15.5 V) System-controlled
bq24115RHLT CIL
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
Web site at www.ti.com.
(2) The RHL package is available in the following options:
T – taped and reeled in quantities of 250 devices per reel
R – taped and reeled in quantities of 3000 devices per reel
(3) This product is RoHS-compatible, including a lead concentration that does not exceed 0.1% of total product weight, and is suitable for
use in specified lead-free soldering processes.
ABSOLUTE MAXIMUM RATINGS
(1)
over operating free-air temperature range (unless otherwise noted)
UNIT
Supply voltage range (with respect to V
SS
) IN, VCC 20 V
STAT1, STAT2, PG, CE, CELLS, SNS, BAT –0.3 V to 20 V
OUT –0.7 V to 20 V
Input voltage range (with respect to V
SS
and PGND) CMODE, TS, TTC 7 V
VTSB 3.6 V
ISET1, ISET2 3.3 V
Voltage difference between SNS and BAT inputs (V
SNS
– V
BAT
) ±1 V
Output sink STAT1, STAT2, PG 10 mA
Output current (average) OUT 2.2 A
T
A
Operating free-air temperature range –40°C to 85°C
T
J
Junction temperature range –40°C to 125°C
T
stg
Storage temperature –65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 300°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2 Submit Documentation Feedback Copyright © 2004–2010, Texas Instruments Incorporated
Product Folder Link(s): bq24100 bq24103 bq24103A bq24104 bq24105 bq24108 bq24109 bq24113 bq24113A
bq24115