Datasheet

ABSOLUTE MAXIMUM RATINGS
(1)
DISSIPATION RATINGS
RECOMMENDED OPERATING CONDITIONS
bq24380
bq24381
bq24382
SLUS805B – APRIL 2008 – REVISED MARCH 2009 ......................................................................................................................................................... www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION
DEVICE V
OVP
V
O(REG)
PACKAGE
(1)
MARKING
bq24380 6.3 V 5.5 V 2mm x 2mm SON CFE
bq24381 7.1 V 5 V 2mm x 2mm SON CFW
bq24382 10.5 V 5 V 2mm x 2mm SON OBE
(1) For the most current package and ordering information, see the Package Option Addendum at the end
of this document, or see the TI Web site at www.ti.com .
over operating free-air temperature range (unless otherwise noted)
VALUE UNIT
IN (with respect to VSS) – 0.3 to 30 V
V
I
Input voltage OUT (with respect to VSS) – 0.3 to 12 V
FAULT, CE, VBAT (with respect to VSS) – 0.3 to 7 V
I
OUT
max Output source current OUT 2 A
Output sink current FAULT 15 mA
T
J
Junction temperature – 40 to 150 ° C
T
stg
Storage temperature – 65 to 150 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage
values are with respect to the network ground terminal unless otherwise noted.
PACKAGE R
θ JC
R
θ JA
DSG 5 ° C/W 75 ° C/W
MIN MAX UNIT
V
I
IN voltage range 3.3 30 V
I
O
Current, OUT pin 1.7 A
T
J
Junction temperature -40 125 ° C
2 Submit Documentation Feedback Copyright © 2008 – 2009, Texas Instruments Incorporated
Product Folder Link(s): bq24380 bq24381 bq24382