Datasheet

I
2
C Pro (Advanced) Screen www.ti.com
Figure 12. I
2
C Pro (Advanced) Screen
10.2 bq275xx Programming
This screen allows device reprogramming from unencrypted and encrypted files.
10.3 Firmware Programming Procedure
1. Ensure that jumpers J2 and J3 are shunted.
2. Connect J1 (EVM bus communication) to the SMBus connector of the EV2300 or EV2400.
16
bq28550 Single Cell Li-Ion Battery Gas Gauge and Protection EVM SLUU520– July 2011
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated