Data Sheet
Table Of Contents
- 1 Module Overview
- Table of Contents
- 2 Revision History
- 3 Device Comparison
- 4 Terminal Configuration and Functions
- 5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Current Consumption Summary: 2.4 GHz RF Band
- 5.5 Current Consumption Summary: 5 GHz RF Band
- 5.6 TX Power Control for 2.4 GHz Band
- 5.7 TX Power Control for 5 GHz Band
- 5.8 Brownout and Blackout Conditions
- 5.9 Electrical Characteristics for DIO Pins
- 5.10 WLAN Receiver Characteristics
- 5.11 WLAN Transmitter Characteristics
- 5.12 BLE and WLAN Coexistence Requirements
- 5.13 Reset Requirement
- 5.14 Thermal Resistance Characteristics for MOB Package
- 5.15 Timing and Switching Characteristics
- 5.16 External Interfaces
- 6 Detailed Description
- 7 Applications, Implementation, and Layout
- 8 Environmental Requirements and SMT Specifications
- 9 Device and Documentation Support
- 10 Mechanical, Packaging, and Orderable Information
- Important Notice
TI Confidential – NDA Restrictions
ADVANCEINFORMATION
25
CC3135MOD
www.ti.com
SWRS225A –FEBRUARY 2019–REVISED AUGUST 2019
Submit Documentation Feedback
Product Folder Links: CC3135MOD
SpecificationsCopyright © 2019, Texas Instruments Incorporated
5.11 WLAN Transmitter Characteristics
(1) Transmit power will be reduced by 1.5dB for V
BAT
< 2.8V
(2) The OFDM and MCS7 edge channels (2412 and 2462 MHz) have reduced TX power to meet FCC emission limits.
(3) Power of 802.11b rates are reduced to meet ETSI requirements in Europe.
(4) Channels 1 (2142 MHz) through 11 (2462 MHz) are supported for FCC.
(5) Channels 1 (2142 MHz) through 13 (2472MHz) are supported for Europe and Japan. Note that channel 14 is not supported for Japan.
Table 5-4. WLAN Transmitter Characteristics: 2.4 GHz Band
T
A
= 25°C, V
BAT
= 2.3 V to 3.6 V.
(1)
Parameters measured at SoC pin on channel 6 (2437 MHz).
(2)(3)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Operating frequency range
(4)(5)
2412 2472 MHz
Maximum RMS output power measured at 1
dB from IEEE spectral mask or EVM
1 DSSS 16
dBm
2 DSSS 16
11 CCK 16.3
6 OFDM 15.3
9 OFDM 15.3
18 OFDM 15
36 OFDM 14
54 OFDM 12.5
MCS7 11
Transmit center frequency accuracy –25 25 ppm
(1) Transmit power will be reduced by 1.5dB for V
BAT
< 2.8V
(2) FCC channels 36, 60, 64, 100, and 140, where harmonics/sub-harmonics of fall in the FCC restricted band, have reduced output power
to meet the FCC RSE requirement.
(3) The edge channels (100 and 140) have reduced TX power to meet FCC emissions limits.
(4) FCC band covers U-NII-1, U-NII-2A, U-NII-2C, and U-NII-3 20-MHz BW modulations.
(5) Europe bands 1, 2 and 3, 20-MHz BW modulations are supported.
(6) For Japan, W52, W53 and W56, 20-MHz BW modulations are supported.
Table 5-5. WLAN Transmitter Characteristics: 5 GHz Band
T
A
= 25°C, V
BAT
= 2.3 V to 3.6 V.
(1)
Parameters measured at SoC pin are the average of channels 40, 56, 120, and 157 .
(2)(3)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Operating frequency range
(4)(5)(6)
5180 5825 MHz
Maximum RMS output power measured at 1
dB from IEEE spectral mask or EVM
6 OFDM 15.1
dBm
9 OFDM 15.1
18 OFDM 15.1
36 OFDM 13.6
54 OFDM 12
MCS7 11
Transmit center frequency accuracy -20 20 ppm