Data Sheet
Table Of Contents
- 1 Module Overview
- Table of Contents
- 2 Revision History
- 3 Device Comparison
- 4 Terminal Configuration and Functions
- 5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Current Consumption Summary: 2.4 GHz RF Band
- 5.5 Current Consumption Summary: 5 GHz RF Band
- 5.6 TX Power Control for 2.4 GHz Band
- 5.7 TX Power Control for 5 GHz Band
- 5.8 Brownout and Blackout Conditions
- 5.9 Electrical Characteristics for DIO Pins
- 5.10 WLAN Receiver Characteristics
- 5.11 WLAN Transmitter Characteristics
- 5.12 BLE and WLAN Coexistence Requirements
- 5.13 Reset Requirement
- 5.14 Thermal Resistance Characteristics for MOB Package
- 5.15 Timing and Switching Characteristics
- 5.16 External Interfaces
- 6 Detailed Description
- 7 Applications, Implementation, and Layout
- 8 Environmental Requirements and SMT Specifications
- 9 Device and Documentation Support
- 10 Mechanical, Packaging, and Orderable Information
- Important Notice
TI Confidential – NDA Restrictions
ADVANCEINFORMATION
33
CC3135MOD
www.ti.com
SWRS225A –FEBRUARY 2019–REVISED AUGUST 2019
Submit Documentation Feedback
Product Folder Links: CC3135MOD
Detailed DescriptionCopyright © 2019, Texas Instruments Incorporated
6 Detailed Description
6.1 Overview
The CC3135MOD dual-band Wi-Fi module contains a dedicated Arm
®
MCU that offloads many of the
networking activities from the host MCU. Including an 802.11 a/b/g/n radio, baseband, and MAC with a
powerful crypto engine for a fast, secure WLAN and Internet connections with 256-bit encryption. The
CC3135MOD module supports station, AP, and Wi-Fi Direct modes. The module also supports WPA2
personal and enterprise security and WPS 2.0. The Wi-Fi network processor includes an embedded IPv6
and IPv4 TPC/IP stack.
6.2 Module Features
6.2.1 WLAN
The WLAN features are as follows:
• 802.11 a/b/g/n integrated radio, modem, and MAC supporting WLAN communication as a BSS station,
AP, and Wi-Fi Direct client and group owner with CCK and OFDM rates in the 2.4 GHz ISM band,
channels 1 to 13, and 5 GHz U-NII band.
NOTE
802.11n is supported only in Wi-Fi station, Wi-Fi direct, and P2P client modes.
• Autocalibrated radio with a single-ended 50-Ω interface enables easy connection to the antenna
without requiring expertise in radio circuit design.
• Advanced connection manager with multiple user-configurable profiles stored in a serial Flash allows
automatic, fast connection to an access point without user or host intervention.
• Supports all common Wi-Fi security modes for personal and enterprise networks, with on-chip security
accelerators, including WEP, WPA/WPA2 PSK, and WPA2 Enterprise (802.1x).
• Smart provisioning options deeply integrated within the device provide a comprehensive end-to-end
solution. Elaborate events notification to the host enable the application to control the provisioning
decision flow. The wide variety of Wi-Fi provisioning methods include:
– Access Point using HTTPS
– SmartConfig Technology: a 1-step, 1-time process to connect a CC3135MOD-enabled module to
the home wireless network, removing dependency on the I/O capabilities of the host MCU; thus, the
device is usable by deeply embedded applications.
• 802.11 transceiver mode transmits and receives proprietary data through a socket without adding MAC
or PHY headers, and provides the option to select the working channel, rate, and transmitted power.
The receiver mode works together with the filtering options.