Data Sheet
Table Of Contents
- 1 Module Overview
- Table of Contents
- 2 Revision History
- 3 Device Comparison
- 4 Terminal Configuration and Functions
- 5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 ESD Ratings
- 5.3 Recommended Operating Conditions
- 5.4 Current Consumption Summary: 2.4 GHz RF Band
- 5.5 Current Consumption Summary: 5 GHz RF Band
- 5.6 TX Power Control for 2.4 GHz Band
- 5.7 TX Power Control for 5 GHz Band
- 5.8 Brownout and Blackout Conditions
- 5.9 Electrical Characteristics for DIO Pins
- 5.10 WLAN Receiver Characteristics
- 5.11 WLAN Transmitter Characteristics
- 5.12 BLE and WLAN Coexistence Requirements
- 5.13 Reset Requirement
- 5.14 Thermal Resistance Characteristics for MOB Package
- 5.15 Timing and Switching Characteristics
- 5.16 External Interfaces
- 6 Detailed Description
- 7 Applications, Implementation, and Layout
- 8 Environmental Requirements and SMT Specifications
- 9 Device and Documentation Support
- 10 Mechanical, Packaging, and Orderable Information
- Important Notice
TI Confidential – NDA Restrictions
ADVANCEINFORMATION
BLE
CCxxxx
WLAN
CC3135MOD
RF
CC_COEX_BLE_IN
RF_ABG
Coex IO
Antenna Selection
SPDT RF Switch
ANT_SEL_1
ANT_SEL_2
Dual Band Ant. 1
Dual Band Ant. 2
BLE Ant.
46
CC3135MOD
SWRS225A –FEBRUARY 2019–REVISED AUGUST 2019
www.ti.com
Submit Documentation Feedback
Product Folder Links: CC3135MOD
Applications, Implementation, and Layout Copyright © 2019, Texas Instruments Incorporated
(3) The recommended Antenna switch is the Richwave RTC6608OSP.
Figure 7-2 shows the antenna selection implementation for Wi-Fi, with BLE operating on it's own antenna.
Note in this implementation, only a single GPIO from the BLE device to the CC3135MOD device is
required. The Antenna switch
(3)
is controlled by 2 GPIO lines from the CC3135MOD device. Table 4-2
lists which GPIOs can be used for Antenna Selection.
Figure 7-2. Coexistence Solution with Wi-Fi Antenna Selection and dedicated BLE antenna