Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Multiplexer Multiplexer Single supply PDIP 16

CD54ACT153, CD74ACT153

DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS

SCHS339 – MARCH 2003

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Inputs Are TTL-Voltage Compatible

Speed of Bipolar F, AS, and S, With

Significantly Reduced Power

Consumption

Balanced Propagation Delays

±24-mA Output Drive Current

– Fanout to 15 F Devices

SCR-Latchup-Resistant CMOS Process

and Circuit Design

Exceeds 2-kV ESD Protection Per

MIL-STD-883, Method 3015

description/ordering information

Each of these data selectors/multiplexers contains inverters and drivers to supply full binary decoding data

selection to the AND-OR gates. Separate strobe (G

) inputs are provided for each of the two 4-line sections.

ORDERING INFORMATION

PACKAGE

†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

PDIP – E Tube CD74ACT153E CD74ACT153E

55°Cto125°C

SOIC M

Tube CD74ACT153M

ACT153M

–

55°C

125°C

SOIC

–

Tape and reel CD74ACT153M96

ACT153M

CDIP – F Tube CD54ACT153F3A CD54ACT153F3A

†

Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines

are available at www.ti.com/sc/package.

FUNCTION TABLE

INPUTS

OUTPUT

SELECT

‡

DATA

OUTPUT

B A C0 C1 C2 C3

X X X X X X H L

L LLXXXL L

L LHXXXL H

L HXLXXL L

L HXHXXL H

H LXXLXL L

H LXXHXL H

H HXXXLL L

H H X X X H L H

‡

Select inputs A and B are common to both sections.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

CD54ACT153 ...F PACKAGE

CD74ACT153 ...E OR M PACKAGE

(TOP VIEW)

1C3

1C2

1C1

1C0

GND

2C3

2C2

2C1

2C0

On products compliant to MIL-PRF-38535, all parameters are tested

unless otherwise noted. On all other products, production

processing does not necessarily include testing of all parameters.

Summary of content (15 pages)

PAGE 1
CD54ACT153, CD74ACT153 DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCHS339 – MARCH 2003 D D D D D D Inputs Are TTL-Voltage Compatible Speed of Bipolar F, AS, and S, With Significantly Reduced Power Consumption Balanced Propagation Delays ±24-mA Output Drive Current – Fanout to 15 F Devices SCR-Latchup-Resistant CMOS Process and Circuit Design Exceeds 2-kV ESD Protection Per MIL-STD-883, Method 3015 CD54ACT153 . . . F PACKAGE CD74ACT153 . . .
PAGE 2
CD54ACT153, CD74ACT153 DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCHS339 – MARCH 2003 logic diagram (positive logic) A B 1G 1C0 14 2 1 6 TG TG 1C1 5 TG 7 1C2 4 1Y TG TG 1C3 2G 2C0 3 TG 15 10 TG TG 2C1 11 TG 9 2C2 12 TG TG 2C3 2 13 TG POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2Y
PAGE 3
CD54ACT153, CD74ACT153 DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCHS339 – MARCH 2003 absolute maximum ratings over operating free-air temperature range† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 6 V Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
CD54ACT153, CD74ACT153 DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCHS339 – MARCH 2003 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS MIN VOH VOL VI = VIH or VIL VI = VIH or VIL II ICC VI = VCC or GND VI = VCC or GND, DICC‡ VI = VCC – 2.1 V –55°C to 125°C TA = 25°C VCC MAX MIN –40°C to 85°C MAX MIN UNIT MAX IOH = –50 µA IOH = –24 mA IOH = –50 mA† 4.5 V 4.4 4.5 V 3.
PAGE 5
CD54ACT153, CD74ACT153 DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS SCHS339 – MARCH 2003 PARAMETER MEASUREMENT INFORMATION S1 R1 = 500 Ω From Output Under Test 2 × VCC Open GND CL = 50 pF (see Note A) R2 = 500 Ω TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open 2 × VCC GND tw 3V 1.5 V Input LOAD CIRCUIT 1.5 V 0V VOLTAGE WAVEFORMS PULSE DURATION CLR Input 3V Reference Input 3V 1.5 V 1.5 V 0V 0V trec Data Input 3V 1.5 V CLK th tsu 1.
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.com 11-Apr-2013 Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
PAGE 8
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant CD74ACT153M96 SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 CD74ACT153NSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 26-Jan-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) CD74ACT153M96 CD74ACT153NSR SOIC D 16 2500 333.2 345.9 28.6 SO NS 16 2000 367.0 367.0 38.
PAGE 10
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.