Manualshelf

Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - multiplexers, demultiplexers TSSOP 16
12345678910
CD/74HC4051, CD54/74HCT4051, CD54/74HC4052,
www.ti.com
SCHS122J –NOVEMBER 1997–REVISED FEBRUARY 2011
CD74HCT4052, CD54/74HC4053, CD54/74HC54053
HIGH-SPEED CMOS LOGIC ANALOG MULTIPLEXERS/DEMULTIPLEXERS
Check for Samples: CD/74HC4051, CD54/74HCT4051, CD54/74HC4052,
1
FEATURES
– Direct LSTTL Input Logic Compatibility
V
IL
= 0.8 V Max, V
IH
= 2 V Min
• Wide Analog Input Voltage Range. . ±5 V Max
– CMOS Input Compatibility
• Low ON Resistance
I
I
≤ 1 μA at V
OL
, V
OH
– 70 Ω Typical (V
CC
– V
EE
= 4.5 V)
– 40 Ω Typical (V
CC
– V
EE
= 9 V)
DESCRIPTION
• Low Crosstalk Between Switches
These devices are digitally controlled analog switches
• Fast Switching and Propagation Speeds
which utilize silicon gate CMOS technology to
• Break-Before-Make Switching
achieve operating speeds similar to LSTTL with the
low power consumption of standard CMOS integrated
• Wide Operating Temperature Range
circuits.
–55°C to 125°C
These analog multiplexers/demultiplexers control
• CD54HC/CD74HC Types
analog voltages that may vary across the voltage
– Operation Control Voltage . . . . . . 2 V to 6 V
supply range (i.e., V
CC
to V
EE
). They are bidirectional
– Switch Voltage . . . . . . . . . . . . . . 0 V to 10 V
switches thus allowing any analog input to be used as
«
an output and vice-versa. The switches have low ON
resistance and low OFF leakages. In addition, all
• CD54HCT/CD74HCT Types
three devices have an enable control which, when
– Operation Control Voltage . . . 4.5 V to 5.5 V
high, disables all switches to their OFF state.
– Switch Voltage . . . . . . . . . . . . . . . 0 V to 10
V
ORDERING INFORMATION
(1)
TEMP. RANGE
PART NUMBER PACKAGE
(°C)
CD54HC4051F3A –55 to 125 16 Ld CERDIP
CD54HC4052F3A –55 to 125 16 Ld CERDIP
CD54HC4053F3A –55 to 125 16 Ld CERDIP
CD54HCT4051F3A –55 to 125 16 Ld CERDIP
CD74HC4051E –55 to 125 16 Ld PDIP
CD74HC4051M –55 to 125 16 Ld SOIC
CD74HC4051MT –55 to 125 16 Ld SOIC
CD74HC4051M96G3 –55 to 125 16 Ld SOIC
CD74HC4051NSR –55 to 125 16 Ld SOP
CD74HC4051PWR –55 to 125 16 Ld TSSOP
CD74HC4051PWT –55 to 125 16 Ld TSSOP
CD74HC4052E –55 to 125 16 Ld PDIP
CD74HC4052M –55 to 125 16 Ld SOIC
CD74HC4052MT –55 to 125 16 Ld SOIC
CD74HC4052M96G3 –55 to 125 16 Ld SOIC
CD74HC4052NSR –55 to 125 16 Ld SOP
CD74HC4052PW –55 to 125 16 Ld TSSOP
CD74HC4052PWR –55 to 125 16 Ld TSSOP
(1) When ordering, use the entire part number. The suffixes 96 and R denote tape and reel. The suffix T denotes a small-quantity reel of
250.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
© 1997–2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.

Summary of content (35 pages)