Barcode Reader User Manual

System Requirements
1-2
1.1 System Requirements
To install and use the code generation tools, you need the items listed in the
following hardware and software checklists.
Hardware checklist
Host 32-bit x86-based or Pentium based PC with an ISA/EISA bus
Memory 4M–16M bytes of RAM plus 32M bytes of hard-disk space for
temporary files and 4M bytes of hard-disk space for the code
generation tools
Display Monochrome or color monitor (color recommended)
Required hardware CD-ROM drive
Optional hardware Microsoft compatible mouse
Software checklist
Operating system One of these operating systems:
MS-DOS
PC-DOS
Windows 3.1x
CD-ROM TMS470R1x Code Generation Tools
Note: Memory Needed
The code generation tools, when installed on a PC, require at least 4M bytes
of memory, but you can expect some performance problems when using only
4M bytes. (16M bytes is recommended.) You may want to free as much
memory as possible before running the tools, especially if you have less than
16M bytes.