Barcode Reader User Manual

Installing the Code Generation Tools

3-4

Copying the files

Be sure you are not logged on as root. After you mount the CD-ROM, you must

create the directory that will contain the tools software and copy the software

to that directory.

1) Create a tools directory

on your hard disk. To create this directory, enter:

mkdir /

your_pathname

tool_dir

2) Copy the files from the CD-ROM to your hard-disk system:

cp –r * /

your_pathname

tool_dir

Unmounting the CD-ROM

You must unmount the CD-ROM after copying the files.

If you have SunOS 4.1.x, 5.0, or 5.1, as root, enter the following from a

command shell:

umount /cdrom

eject /dev/sr0

exit

If you have SunOS 5.2 or higher, enter the following from a command

shell:

eject