Barcode Reader User Manual

Kernel Error Messages
A-6
9: cannot allocate tstack
Description There is not enough memory to load DOS/4G.
Action Make more memory available and try again.
10: cannot allocate memory for GDT
Description There is not enough memory to load DOS/4G.
Action Make more memory available and try again.
11: no passup stack selectors – GDT too small
Description This error indicates an internal error in DOS/4G or an
incompatibility with other software.
Action Contact technical support.
12: no control program selectors – GDT too small
Description This error indicates an internal error in DOS/4G or an incom-
patibility with other software.
Action Contact technical support.
13: cannot allocate transfer buffer
Description There is not enough memory to load DOS/4G.
Action Make more memory available and try again.
14: premature EOF
Description DOS4G.EXE or a bound DOS/4G application has probably
been corrupted.
Action Recopy the file from the source media.
15: protected mode available only with 386 or 486
Description DOS/4G requires an 80386 (or later) CPU. It cannot run on an
80286 (or earlier) CPU.
Action Reinstall and run the tools on a 386 (or later) PC.