User's Manual

Operations Manual

Sontheim_Telemetry_Verona_Gen 4_operations manual.docx Version of the Document: 2.1

13. SW Access to COMhawk xt:

The LAN interface of the telemetry node is connected to the wiring harness (RJ45 line) and is

connected directly to the LAN port of the PC (no switch or similar in between). The IP4 network

configuration of the PC must be set to "Use the following IP address".

Figure 5 Network Configuration (in Windows 10)

Figure 6 Ethernet Configuration

The test object is now controlled via LAN connection.

This requires an SSH connection from the test PC to the test object. This is done, for

example, using the supplied tool "putty" (Release 0.76).

13.1. Operating the Software via LAN (Verona Gen 4 is powered and connected

to the PC via LAN cable)

software tool: