User's Manual

Operations Manual
© Sontheim Industrie Elektronik GmbH 13.05.2022 page 28 of 30
Sontheim_Telemetry_Verona_Gen 4_operations manual.docx Version of the Document: 2.1
FASTENERS SHOULD BE TIGHTENED BY HAND AT EACH LOCATION, APPLYING EQUAL
PRESSURE AGAINST MOUNTING SURFACE IN ALL LOCATIONS, THEN TORQUE TO 10-12 IN.
LB (1.13 - 1.36 Nm) FOLLOWING THE PATTERN SHOWN:
TORQUE PATTERN: 1, 2, 3, 4
17. Verona Gen 4 Pinout
Figure 27 Verona Gen 4 Pinout
Figure 28 30 Pin Receptacle (Rear View)
Assignment of RJ45-connector
for Ethernet according to
EIA/TIA 568A (network cable):
Signal
Pin
Color
TX+
1
white/green
TX-
2
green
RX+
3
white/orange
4
blue
5
white/blue
RX-
6
orange
7
white/brown
8
brown
Figure 29 Ethernet RJ45-Plug and Network-Cable