User manual

Timer_B Operation

13-16 Timer_B

Output Example—Timer in Continuous Mode

The OUTx signal is changed when the timer reaches the TBCLx and TBCL0

values, depending on the output mode, An example is shown in Figure 13−13

using TBCL0 and TBCL1.

Figure 13−13. Output Example—Timer in Continuous Mode

TBR

(max)

TBIFG

Output Mode 1: Set

Output Mode 2: Toggle/Reset

Output Mode 3: Set/Reset

Output Mode 4: Toggle

Output Mode 5: Reset

Output Mode 6: Toggle/Set

Output Mode 7: Reset/Set

TBCL0

TBCL1

EQU1 TBIFG EQU1 EQU0 Interrupt EventsEQU0