User manual

SD16_A Operation
22-7SD16_A
Figure 22−3 shows the digital filter step response and conversion points. For
step changes at the input after start of conversion a settling time must be
allowed before a valid conversion result is available. The SD16INTDLYx bits
can provide sufficient filter settling time for a full-scale change at the ADC
input. If the step occurs synchronously to the decimation of the digital filter the
valid data will be available on the third conversion. An asynchronous step will
require one additional conversion before valid data is available.
Figure 22−3. Digital Filter Step Response and Conversion Points
1
2
3
4
1
0
0.2
0.4
0.6
0.8
1
0
0.2
0.4
0.6
0.8
1
2
3
Asynchronous Step Synchronous Step
% V
FSR
Conversion Conversion