User manual

2. Installation

The installation of eZ430-RF2480 Sensor Monitor is very straight forward. Download the

zip file from internet and unzip the setup file. Double click on the setup file and follow the

instructions.

Note: The PC application should be installed before the eZ430-RF2480 dongle is

connected to the PC. This is to be sure that the required files for the driver installation

are available

3. Driver installation

The PC application will communicate with the eZ430-RF2480 dongle over a virtual COM

port. The first time the dongle is connected to the PC, the new HW will be detected and

the wizard will appear and ask to install the necessary software. The required “inf” file

will be installed when installing the PC application. Please follow the guidelines in this

section based on your PC’s operating system.

3.1. Windows XP

When the dialog box appears, select

“No, not this time” and Click next.

Select “Install the software

automatically” and click next.