Datasheet

DIT4096

SBOS225A

www.ti.com

Power-Supply Voltage, V

.............................................................. +6.5V

Input Current ................................................................................... ±10mA

Digital Input Voltage .......................................................... –0.2V to +5.5V

Digital Output Voltage ............................................ –0.2V to (V

+ 0.2V)

Power Dissipation .......................................................................... 300mW

Operating Temperature Range ........................................–40°C to +85°C

Storage Temperature ..................................................... –55°C to +125°C

Lead Temperature (soldering, 5s) ................................................. +260°C

Package Temperature (IR re-flow, 10s)........................................ +235°C

ABSOLUTE MAXIMUM RATINGS

(1)

ELECTROSTATIC

DISCHARGE SENSITIVITY

This integrated circuit can be damaged by ESD. Texas Instru-

ments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling

and installation procedures can cause damage.

ESD damage can range from subtle performance degradation

to complete device failure. Precision integrated circuits may be

more susceptible to damage because very small parametric

changes could cause the device not to meet its published

specifications.

PACKAGE/ORDERING INFORMATION

SPECIFIED

PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT

PRODUCT PACKAGE-LEAD DESIGNATOR

(1)

RANGE MARKING NUMBER MEDIA, QUANTITY

DIT4096 TSSOP-28 PW –40°C to +85°C DIT4096IPW DIT4096IPW Rails, 50

"" " " "DIT4096IPWR Tape and Reel, 2000

NOTE: (1) For the most current specifications and package information, refer to our web site at www.ti.com.

NOTE: (1) Stresses above these ratings may cause permanent damage.

Exposure to absolute maximum conditions for extended periods may degrade

device reliability. These are stress ratings only, and functional operation of the

device at these or any other conditions beyond those specified is not implied.