Owner's manual

1 Features
1.1 Block Diagram
32-bitPeripheralbus
ADC
Timingandchannel
controller
Comparator
CMPUDATA
InterrupttoCPU
CMPTGT
CMPLDATA
Interrupt
controller
10-bit
Analog-to-digital
converter
6to1 Analoginput
selector
ADC_CH0
ADC_CH1
ADC_CH2
ADC_CH3
ADC_CH4
ADC_CH5
ADCTL
AD1DAT
AD2DAT
AD4DAT
AD3DAT
AD5DAT
AD0DAT
SETDIV
CHSEL
EMUCTRL
SPRUFI7-001
User's Guide
SPRUFI7 – March 2009
Analog to Digital Converter (ADC) Interface
DM36x has a 6-channel, 10-bit analog-to-digital converter (ADC) interface. The CPU communicates to the
ADC interface using 32-bit-wide control registers accessible via the internal peripheral bus.
The DM36x ADC interface has following features:
• Supports six configurable analog Input
• Supports for successive approximation type 10-bit, A-D converter
• Programmable sampling / conversion time (base clock is AUXCLK)
• Supports channel select by auto scan conversion
• Supports mode select by one-shot mode or free-run mode
• Programmable setup (Idle) period to secure A/D sampling start time
• Supports the clock stop signals to connect the PSC
Figure 1 shows the data path and control path of ADC interface.
Figure 1. ADC IF Block Diagram
Analog to Digital Converter (ADC) Interface8 SPRUFI7 – March 2009
Submit Documentation Feedback