DS3668 DS3668 Quad Fault Protected Peripheral Driver Literature Number: SNLS351A
DS3668 Quad Fault Protected Peripheral Driver General Description Applications The DS3668 quad peripheral driver is designed for those applications where low operating power, high breakdown voltage, high output current and low output ON voltage are required. Unlike most peripheral drivers available, a unique fault protected circuit is incorporated on each output. When the load current exceeds 1.
DS3668 Truth Table IN EN H H OUT L L H Z H L Z L L Z H = High state L = Low state Z = High impedance state www.national.
Storage Temperature Range Lead Temperature (Soldering, 4 seconds) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage Input Voltage Output Voltage Continuous Power Dissipation @ 25˚C Free-Air (Note 5) −65˚C to +150˚C 260 Operating Conditions 7.0V 15V 70V Min Max Supply Voltage 3.00 5.
DS3668 AC Test Circuit Switching Waveforms DS005225-3 DS005225-2 Typical Application DS005225-4 Protection Circuit Block Diagram DS005225-5 www.national.
DS3668 Quad Fault Protected Peripheral Driver Physical Dimensions inches (millimeters) unless otherwise noted Molded Dual-In-Line Package (N) Order Number DS3668N NS Package Number N16E LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1.
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
