Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - drivers LVDS 1/0 SOT 23 5

NRND

DS90LV011AH

www.ti.com

SNLS198A –SEPTEMBER 2005–REVISED APRIL 2013

DS90LV011AH High Temperature 3V LVDS Differential Driver

Check for Samples: DS90LV011AH

FEATURES

DESCRIPTION

The DS90LV011AH is an LVDS driver optimized for

• -40°C to 125°C Operating Temperature Range

high data rate and low power applications. The

• Conforms to TIA/EIA-644-A Standard

DS90LV011AH is a current mode driver allowing

• >400Mbps (200MHz) Switching Rates

power dissipation to remain low even at high

frequency. In addition, the short circuit fault current is

• 700 ps (100 ps Typical) Maximum Differential

also minimized. The device is designed to support

Skew

data rates in excess of 400Mbps (200MHz) utilizing

• 1.5 ns Maximum Propagation Delay

Low Voltage Differential Signaling (LVDS)

• Single 3.3V Power Supply

technology.

• ±350 mV Differential Signaling

The device is offered in a 5-lead SOT-23 package.

• Power Off Protection (Outputs in TRI-STATE)

The LVDS outputs have been arranged for easy PCB

layout. The differential driver outputs provide low EMI

• Pinout Simplifies PCB Layout

with its typical low output swing of 350 mV. The

• Low Power Dissipation (23 mW @ 3.3V

DS90LV011AH can be paired with its companion

Typical)

single line receiver, the DS90LT012AH, or with any of

• SOT-23 5-Lead Package

TI's LVDS receivers, to provide a high-speed LVDS

interface.

• Pin Compatible with SN65LVDS1

Connection Diagram

Figure 1. Top View

See Package Number DBV (R-PDSO-G5)

Functional Diagram

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (13 pages)

PAGE 1
NRND DS90LV011AH www.ti.com SNLS198A – SEPTEMBER 2005 – REVISED APRIL 2013 DS90LV011AH High Temperature 3V LVDS Differential Driver Check for Samples: DS90LV011AH FEATURES DESCRIPTION • • • • The DS90LV011AH is an LVDS driver optimized for high data rate and low power applications. The DS90LV011AH is a current mode driver allowing power dissipation to remain low even at high frequency. In addition, the short circuit fault current is also minimized.
PAGE 2
NRND DS90LV011AH SNLS198A – SEPTEMBER 2005 – REVISED APRIL 2013 www.ti.com Absolute Maximum Ratings (1) (2) −0.3V to +4V Supply Voltage (VDD) LVCMOS input voltage (TTL IN) −0.3V to +3.6V LVDS output voltage (OUT±) −0.3V to +3.9V LVDS output short circuit current 24mA Maximum Package Power Dissipation @ +25°C DBV Package 902 mW Derate DBV Package 7.22 mW/°C above +25°C Thermal resistance (θJA) 138.5°C/Watt −65°C to +150°C Storage Temperature Lead Temperature Range Soldering (4 sec.
PAGE 3
NRND DS90LV011AH www.ti.com SNLS198A – SEPTEMBER 2005 – REVISED APRIL 2013 Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified. (1) (2) (3) Symbol Parameter Conditions RL = 100Ω (Figure 2 and Figure 3) Pin Min Typ Max Units OUT+, OUT− 250 350 450 mV 3 35 mV 1.125 1.22 1.
PAGE 4
NRND DS90LV011AH SNLS198A – SEPTEMBER 2005 – REVISED APRIL 2013 www.ti.com PARAMETER MEASUREMENT INFORMATION Figure 2. Differential Driver DC Test Circuit Figure 3. Differential Driver Full Load DC Test Circuit Figure 4. Differential Driver Propagation Delay and Transition Time Test Circuit Figure 5.
PAGE 5
NRND DS90LV011AH www.ti.com SNLS198A – SEPTEMBER 2005 – REVISED APRIL 2013 APPLICATION INFORMATION Table 1. Device Pin Descriptions Package Pin Number SOT-23 Pin Name Description 5 TTL IN LVTTL/LVCMOS driver input pins 4 OUT+ Non-inverting driver output pin 3 OUT− Inverting driver output pin 2 GND Ground pin 1 VDD Power supply pin, +3.3V ± 0.
PAGE 6
NRND DS90LV011AH SNLS198A – SEPTEMBER 2005 – REVISED APRIL 2013 www.ti.com REVISION HISTORY Changes from Original (April 2013) to Revision A • 6 Page Changed layout of National Data Sheet to TI format ............................................................................................................
PAGE 7
PACKAGE OPTION ADDENDUM www.ti.
PAGE 8
PACKAGE OPTION ADDENDUM www.ti.com 30-Oct-2013 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
PAGE 9
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing DS90LV011AHMF/NOPB SOT-23 DS90LV011AHMFX/NOP B SOT-23 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DBV 5 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 DBV 5 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.
PAGE 10
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DS90LV011AHMF/NOPB SOT-23 DBV 5 1000 210.0 185.0 35.0 DS90LV011AHMFX/NOPB SOT-23 DBV 5 3000 210.0 185.0 35.
PAGE 11
PAGE 12
PAGE 13
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.