Datasheet

DS92LV2411, DS92LV2412
SNLS302C –MAY 2010–REVISED APRIL 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)
Supply Voltage – V
DDn
(1.8V) −0.3V to +2.5V
Supply Voltage – V
DDIO
−0.3V to +4.0V
LVCMOS I/O Voltage −0.3V to (VDDIO + 0.3V)
Receiver Input Voltage −0.3V to (VDD + 0.3V)
Driver Output Voltage −0.3V to (VDD + 0.3V)
Junction Temperature +150°C
Storage Temperature −65°C to +150°C
48L WQFN Package
Maximum Power Dissipation Capacity at 25°C 215 mW
Derate above 25°C 1/ θ
JA
mW / °C
θ
JA
(Based on 9 thermal vias) 27.1 °C/W
θ
JC
(Based on 9 thermal vias) 4.5 °C/W
60L WQFN Package
Maximum Power Dissipation Capacity at 25°C 478 mW
Derate above 25°C 1/ θ
JA
mW / °C
θ
JA
(Based on 9 thermal vias) 24.6 °C/W
θ
JC
(Based on 9 thermal vias) 2.8 °C/W
ESD Rating (HBM) ≥±8 kV
ESD Rating (CDM) ≥±1 kV
ESD Rating (MM) ≥±250 V
ESD Rating (IEC61000–4–2), R
D
= 330Ω, C
S
= Air Discharge (D
OUT+
, D
OUT-
≥±25 kV
150pF
Contact Discharge (D
OUT+
, D
OUT-
≥±8 kV
Air Discharge (R
IN+
, D
IN-
≥±25 kV
Contact Discharge (R
IN+
, R
IN-
≥±8 kV
For soldering specifications:
See product folder at www.ti.com and http://www.ti.com/lit/SNOA549.
(1) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(2) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions.
Recommended Operating Conditions
Min Nom Max Units
Supply Voltage (V
DDn
) 1.71 1.8 1.89 V
LVCMOS Supply Voltage (V
DDIO
) 1.71 1.8 1.89 V
OR
LVCMOS Supply Voltage (V
DDIO
) 3.0 3.3 3.6 V
Operating Free Air Temperature (T
A
) −40 +25 +85 °C
Clock Frequency 5 50 MHz
Supply Noise
(1)
50 mV
P-P
(1) Supply noise testing was done with minimum capacitors on the PCB. A sinusoidal signal is AC coupled to the V
DDn
(1.8V) supply with
amplitude = 100 mVp-p measured at the device V
DDn
pins. Bit error rate testing of input to the Ser and output of the Des with 10 meter
cable shows no error when the noise frequency on the Ser is less than 750 kHz. The Des on the other hand shows no error when the
noise frequency is less than 400 kHz.
10 Submit Documentation Feedback Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: DS92LV2411 DS92LV2412