Operation Manual

Programming/Reprogramming the eZ430-Chronos Watch: Disassembly and Assembly of the Housing

www.ti.com

4. Remove the battery before connecting the module to the emulator. Place the screwdriver tip between

the battery and the battery holder (small metal tab) and push the tab away from battery (see

Figure 4-2). Detailed instructions are shown in the eZ430-Chronos Disassembly/Assembly video on

www.ti.com/chronoswiki.

Figure 4-2. Removing Watch Battery

CAUTION

Always remove the battery from the watch before connecting the watch to an

emulator, to prevent the battery from being charged.

WARNING

Properly dispose of the battery. Keep the battery out of the reach

of children. If the battery is swallowed, contact a physician

immediately.

eZ430-Chronos Hardware SLAU292D–November 2009–Revised March 2011

Submit Documentation Feedback