User manual

10.3 Demo Software GUI Setup
10.4 Demo Options
www.ti.com Demo – eZ430-RF2500 Sensor Monitor
Figure 7. IAR Embedded Workbench KickStart Workspace
4. Select Project → Debug in IAR to download the code for the target boards.
5. Select Debug → Go to start running code while in debug mode.
6. Select Debug → Stop Debugging exits the debug mode while leaving the target board executing
code.
1. Ensure the Access Point is connected to the PC.
2. Apply power to the End Device.
3. Launch eZ430-RF2500 Sensor Monitor Demo Visualizer. After installation, a shortcut is placed on the
desktop. It is available on the CD and online at http://www.ti.com/lit/zip/slac139 . The application should
automatically display End Devices when in range.
1. Go to Menu → Settings.
2. Under the settings menu, the demo application is capable of displaying values in Celsius or
Fahrenheit.
3. Checking the box Disable Animations disables the dynamic distance change, thus decreasing CPU
processing on PC.
4. See the demo application help file by clicking Help for more detailed options.
SLAU227E – September 2007 – Revised April 2009 eZ430-RF2500 Development Tool 13
Submit Documentation Feedback