Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Comparator Multi-purpose CMOS, DTL, ECL, MOS, Open collector, TTL SOICN 14

LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N

www.ti.com

SNOSBJ3D –NOVEMBER 1999–REVISED MARCH 2013

LM139/LM239/LM339/LM2901/LM3302 Low Power Low Offset Voltage Quad Comparators

Check for Samples: LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N

FEATURES

APPLICATIONS

• Wide Supply Voltage Range

• Limit Comparators

• LM139/139A Series 2 to 36 V

or ±1 to ±18 V

• Simple Analog-to-Digital Converters

• LM2901: 2 to 36 V

or ±1 to ±18 V

• Pulse, Squarewave and Time Delay Generators

• LM3302: 2 to 28 V

or ±1 to ±14 V

• Wide Range VCO; MOS Clock Timers

• Very Low Supply Current Drain (0.8 mA) — • Multivibrators and High Voltage Digital Logic

Independent of Supply Voltage Gates

• Low Input Biasing Current: 25 nA

DESCRIPTION

• Low Input Offset Current: ±5 nA

The LM139 series consists of four independent

• Offset Voltage: ±3 mV

precision voltage comparators with an offset voltage

• Input Common-Mode Voltage Range Includes

specification as low as 2 mV max for all four

GND

comparators. These were designed specifically to

operate from a single power supply over a wide range

• Differential Input Voltage Range Equal to the

of voltages. Operation from split power supplies is

Power Supply Voltage

also possible and the low power supply current drain

• Low Output Saturation Voltage: 250 mV at 4

is independent of the magnitude of the power supply

voltage. These comparators also have a unique

characteristic in that the input common-mode voltage

• Output Voltage Compatible with TTL, DTL,

range includes ground, even though operated from a

ECL, MOS and CMOS Logic Systems

single power supply voltage.

ADVANTAGES

The LM139 series was designed to directly interface

with TTL and CMOS. When operated from both plus

• High Precision Comparators

and minus power supplies, they will directly interface

• Reduced V

Drift Over Temperature

with MOS logic— where the low power drain of the

• Eliminates Need for Dual Supplies

LM339 is a distinct advantage over standard

comparators.

• Allows Sensing Near GND

• Compatible with all Forms of Logic

• Power Drain Suitable for Battery Operation

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (29 pages)

PAGE 1
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N www.ti.com SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 LM139/LM239/LM339/LM2901/LM3302 Low Power Low Offset Voltage Quad Comparators Check for Samples: LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N FEATURES APPLICATIONS • • • • • • • • • • 1 2 • • • • • • • Wide Supply Voltage Range LM139/139A Series 2 to 36 VDCor ±1 to ±18 VDC LM2901: 2 to 36 VDCor ±1 to ±18 VDC LM3302: 2 to 28 VDCor ±1 to ±14 VDC Very Low Supply Current Drain (0.
PAGE 2
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 www.ti.com One-Shot Multivibrator with Input Lock Out Connection Diagrams Figure 1. CDIP, SOIC, PDIP Packages – Top View See Package Numbers J0014A, D0014A, NFF0014A Figure 2. CLGA Package See Package Numbers NAD0014B, NAC0014A These devices have limited built-in ESD protection.
PAGE 3
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N www.ti.com SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 Absolute Maximum Ratings (1) LM139/LM239/LM339 LM139A/LM239A/LM339A LM3302 LM2901 Supply Voltage, V+ Differential Input Voltage 36 VDC or ±18 VDC (2) 28 VDC or ±14 VDC 36 VDC 28 VDC −0.3 VDC to +36 VDC −0.3 VDC to +28 VDC 50 mA 50 mA PDIP 1050 mW 1050 mW Cavity DIP 1190 mW Input Voltage Input Current (VIN<−0.
PAGE 4
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 www.ti.com Electrical Characteristics (V+=5 VDC, TA = 25°C, unless otherwise stated) Parameter Test Conditions LM139A Min Typ LM239A, LM339A Max Min Typ Max LM139 Min Typ Max Units Input Offset Voltage See (1) 1.0 2.0 1.0 2.0 2.0 5.
PAGE 5
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N www.ti.com SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 Electrical Characteristics (V+ = 5 VDC, TA = 25°C, unless otherwise stated) Parameter Test Conditions LM239, LM339 Min Typ Max LM2901 Min Typ LM3302 Max Min Typ Max Units Input Offset Voltage See (1) 2.0 5.0 2.0 7.
PAGE 6
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 www.ti.com Electrical Characteristics (V+ = 5.0 VDC (1)) Parameter Test Conditions LM139A Min Typ LM239A, LM339A Max Min Typ Max LM139 Min Typ Max Units Input Offset Voltage See (2) 4.0 4.0 9.0 mVDC Input Offset Current IIN(+)−IIN(−), VCM = 0V 100 150 100 nADC Input Bias Current IIN(+) or IIN(−) with Output in 300 400 300 nADC V+−2.
PAGE 7
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N www.ti.com SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 Electrical Characteristics (V+ = 5.0 VDC (1)) Parameter Test Conditions LM239, LM339 Min Typ Max LM2901 Min Typ LM3302 Max Min Typ Max Units Input Offset Voltage See (2) 9.0 9 15 40 mVDC Input Offset Current IIN(+)−IIN(−), VCM = 0V 150 50 200 300 nADC Input Bias Current IIN(+) or IIN(−) with Output in 400 200 500 1000 nADC V+−2.
PAGE 8
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 www.ti.com Typical Performance Characteristics LM139/LM239/LM339, LM139A/LM239A/LM339A, LM3302 Supply Current Input Current Figure 3. Figure 4. Output Saturation Voltage Response Time for Various Input Overdrives – Negative Transition Figure 5. Figure 6. Response Time for Various Input Overdrives – Positive Transition Figure 7.
PAGE 9
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N www.ti.com SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 Typical Performance Characteristics LM2901 Supply Current Input Current Figure 8. Figure 9. Output Saturation Voltage Response Time for Various Input Overdrives – Negative Transition Figure 10. Figure 11. Response Time for Various Input Overdrives – Positive Transition Figure 12.
PAGE 10
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 www.ti.com Application Hints The LM139 series are high gain, wide bandwidth devices which, like most comparators, can easily oscillate if the output lead is inadvertently allowed to capacitively couple to the inputs via stray capacitance. This shows up only during the output voltage transition intervals as the comparator changes states. Power supply bypassing is not required to solve this problem.
PAGE 11
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N www.ti.com SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 Typical Applications (V+ = 5.0 VDC) Figure 13. Basic Comparator Figure 16. AND Gate Copyright © 1999–2013, Texas Instruments Incorporated Figure 14. Driving CMOS Figure 15. Driving TTL Figure 17.
PAGE 12
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 www.ti.com Typical Applications (V+= 15 VDC) Figure 18. One-Shot Multivibrator Figure 19.
PAGE 13
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N www.ti.com SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 Figure 20. One-Shot Multivibrator with Input Lock Out Figure 21.
PAGE 14
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 Figure 22. Large Fan-In AND Gate 14 Submit Documentation Feedback www.ti.com Figure 23.
PAGE 15
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N www.ti.com SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 Figure 24. Time Delay Generator Figure 25. Non-Inverting Comparator with Hysteresis Copyright © 1999–2013, Texas Instruments Incorporated Figure 26.
PAGE 16
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 16 www.ti.com Figure 27. Squarewave Oscillator Figure 28. Basic Comparator Figure 29. Limit Comparator Figure 30.
PAGE 17
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N www.ti.com SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 * Or open-collector logic gate without pull-up resistor Figure 31. Output Strobing V+ = +30 VDC 250 mVDC ≤ VC ≤ +50 VDC 700 Hz ≤ fO ≤ 100 kHz Figure 32. Crystal Controlled Oscillator Figure 33.
PAGE 18
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 Figure 34. Transducer Amplifier 18 Submit Documentation Feedback www.ti.com Figure 35.
PAGE 19
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N www.ti.com SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 Split-Supply Applications (V+ = +15 VDC and V− = −15 VDC) Figure 36. MOS Clock Driver Figure 37. Zero Crossing Detector Copyright © 1999–2013, Texas Instruments Incorporated Figure 38.
PAGE 20
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 www.ti.
PAGE 21
LM139-N, LM239-N, LM2901-N, LM3302-N, LM339-N www.ti.com SNOSBJ3D – NOVEMBER 1999 – REVISED MARCH 2013 REVISION HISTORY Changes from Revision C (March 2013) to Revision D • Page Changed layout of National Data Sheet to TI format ..........................................................................................................
PAGE 22
PACKAGE OPTION ADDENDUM www.ti.
PAGE 23
PACKAGE OPTION ADDENDUM www.ti.com 1-Nov-2013 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM339N/PB NRND PDIP NFF 14 25 TBD Call TI Call TI LM339N MLM339P NRND PDIP NFF 14 25 TBD Call TI Call TI LM339N (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs.
PAGE 24
PACKAGE MATERIALS INFORMATION www.ti.com 8-Apr-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LM2901MX SOIC D 14 2500 330.0 16.4 6.5 9.35 2.3 8.0 16.0 Q1 LM2901MX/NOPB SOIC D 14 2500 330.0 16.4 6.5 9.35 2.3 8.0 16.0 Q1 LM339AMX SOIC D 14 2500 330.0 16.4 6.5 9.35 2.3 8.0 16.
PAGE 25
PACKAGE MATERIALS INFORMATION www.ti.com 8-Apr-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM2901MX SOIC D 14 2500 367.0 367.0 35.0 LM2901MX/NOPB SOIC D 14 2500 367.0 367.0 35.0 LM339AMX SOIC D 14 2500 367.0 367.0 35.0 LM339AMX/NOPB SOIC D 14 2500 367.0 367.0 35.0 LM339MX SOIC D 14 2500 367.0 367.0 35.0 LM339MX/NOPB SOIC D 14 2500 367.0 367.0 35.
PAGE 26
PAGE 27
MECHANICAL DATA NFF0014A N0014A N14A (Rev G) www.ti.
PAGE 28
PAGE 29
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.