Manualshelf

Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Comparator Differential CMOS, MOS, Open collector, TTL SOIC 8
123456789

  
SLCS141D − MAY 2003 − REVISED APRIL 2008
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D Qualified for Automotive Applications
D ESD Protection Exceeds 1000 V Per
MIL-STD-883, Method 3015; Exceeds 100 V
Using Machine Model (C = 200 pF, R = 0)
D Single Supply or Dual Supplies
D Low Supply-Current Drain Independent of
Supply Voltage . . . 0.4 mA Typ Per
Comparator
D Low Input Bias Current . . . 25 nA Typ
D Low Input Offset Current ...5 nA Typ
D Low Input Offset Voltage ...2 mV Typ
D Common-Mode Input Voltage Range
Includes Ground
D Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±36 V
D Low Output Saturation Voltage
D Output Compatible With TTL, MOS, and
CMOS
description/ordering information
This device consists of two independent voltage comparators that are designed to operate from a single power
supply over a wide range of voltages. Operation from dual supplies is possible, as long as the difference
between the two supplies is 2 V to 36 V, and V
CC
is at least 1.5 V more positive than the input common-mode
voltage. Current drain is independent of the supply voltage. The outputs can be connected to other
open-collector outputs to achieve wired-AND relationships.
The LM2903Q is tested from −40°C to 125°C and is manufactured to demanding automotive requirements.
ORDERING INFORMATION
{
T
A
V
IO
max
AT 25°C
MAX V
CC
PACKAGE
‡
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
7 mV 30 V SOIC (D) Tape and reel LM2903QDRQ1 2903Q1
7 mV 30 V TSSOP (PW) Tape and reel LM2903QPWRQ1 2903Q1
−40°C to 125°C
7 mV 32 V SOIC (D) Tape and reel LM2903VQDRQ1 2903VQ1
−40
°
C to 125
°
C
7 mV 32 V TSSOP (PW) Tape and reel LM2903VQPWRQ1 2903VQ1
2 mV 32 V SOIC (D) Tape and reel LM2903AVQDRQ1 2903AVQ
2 mV 32 V TSSOP (PW) Tape and reel LM2903AVQPWRQ1 2903AVQ
†
For the most current package and ordering information, see the Package Option Addendum at the end of this document,
or see the TI web site at http://www.ti.com.
‡
Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging.
symbol (each comparator)
IN+
IN−
OUT
Copyright 2008, Texas Instruments Incorporated
    !"#   $"%&! '#(
'"! !  $#!! $# )# #  #* "#
'' +,( '"! $!#- '#  #!#&, !&"'#
#-  && $##(
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1
2
3
4
8
7
6
5
1OUT
1IN−
1IN+
GND
V
CC
2OUT
2IN−
2IN+
D OR PW PACKAGE
(TOP VIEW)

Summary of content (9 pages)