Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLinear ICsLinear IC - Comparator Multi-purpose DTL, Open collector, Open emitter, RTL, TTL DIP 14

LM119,LM219,LM319

LM119/LM219/LM319 High Speed Dual Comparator

Literature Number: SNOSBJ2A

Summary of content (13 pages)

PAGE 1
LM119,LM219,LM319 LM119/LM219/LM319 High Speed Dual Comparator Literature Number: SNOSBJ2A
PAGE 2
LM119/LM219/LM319 High Speed Dual Comparator General Description The LM119 series are precision high speed dual comparators fabricated on a single monolithic chip. They are designed to operate over a wide range of supply voltages down to a single 5V logic supply and ground. Further, they have higher gain and lower input currents than devices like the LM710.
PAGE 3
LM119/LM219/LM319 Absolute Maximum Ratings (Note 9) Lead Temperature (Soldering, 10 sec.) 260˚C Soldering Information Dual-In-Line Package Soldering (10 seconds) 260˚C Small Outline Package Vapor Phase (60 seconds) 215˚C Infrared (15 seconds) 220˚C See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering surface mount devices.
PAGE 4
Storage Temperature Range −65˚C to 150˚C Lead Temperature (Soldering, 10 sec.) 260˚C Soldering Information Dual-In-Line Package Soldering (10 sec.) 260˚C Small Outline Package Vapor Phase (60 sec.) 215˚C Infrared (15 sec.) 220˚C See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering surface mount devices.
PAGE 5
LM119/LM219/LM319 Typical Performance Characteristics Input Currents LM119A/LM119/LM219 Common Mode Limits DS005705-10 Response Time for Various Input Overdrives Transfer Function DS005705-11 Response Time for Various Input Overdrives DS005705-12 Input Characteristics DS005705-15 DS005705-14 DS005705-13 Response Time for Various Input Overdrives Response Time for Various Input Overdrives Output Saturation Voltage DS005705-18 DS005705-16 www.national.
PAGE 6
LM119A/LM119/LM219 (Continued) Supply Current Supply Current LM119/LM219/LM319 Typical Performance Characteristics Output Limiting Characteristics DS005705-20 DS005705-19 DS005705-21 Typical Performance Characteristics Input Currents LM319A, LM319 Supply Currents Transfer Function DS005705-22 DS005705-23 DS005705-24 Response Time for Various Input Overdrives Response Time for Various Input Overdrives Input Characteristics DS005705-27 DS005705-25 DS005705-26 5 www.national.
PAGE 7
LM119/LM219/LM319 Typical Performance Characteristics Response Time for Various Input Overdrives LM319A, LM319 (Continued) Response Time for Various Input Overdrives DS005705-30 DS005705-28 Supply Current Output Saturation Voltage DS005705-29 Common Mode Limits DS005705-31 Output Limiting Characteristics DS005705-32 DS005705-33 www.national.
PAGE 8
7 *Do not operate the LM119 with more than 16V between GND and V+ DS005705-1 LM119/LM219/LM319 Schematic Diagram www.national.
PAGE 9
LM119/LM219/LM319 Connection Diagrams Metal Can Package DS005705-9 Order Number LM119W/883 See NS Package Number W10A DS005705-7 Case is connected to pin 5 (V−) Top View Order Number LM119H, LM119H/883 (Note 1), or LM319H See NS Package Number H10C www.national.
PAGE 10
LM119/LM219/LM319 Physical Dimensions inches (millimeters) unless otherwise noted Metal Can Package (H) Order Number LM119H, LM119H/883, LM319AH or LM319H NS Package Number H10C Cavity Dual-In-Line Package (J) Order Number LM119J, LM119J/883, LM219J, LM319AJ or LM319J NS Package Number J14A 9 www.national.
PAGE 11
LM119/LM219/LM319 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Dual-In-Line Package (M) Order Number LM319AM or LM319M NS Package Number M14A Molded Dual-In-Line Package (N) Order Number LM319AN or LM319N NS Package Number N14A www.national.
PAGE 12
LM119/LM219/LM319 High Speed Dual Comparator Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Order Number LM119W/883, LM119WG/883 NS Package Number W10A, WG10A LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1.
PAGE 13
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.